http://www.openhardwareconf.org/api.php?action=feedcontributions&feedformat=atom&user=Stuart+Young 2026-04-11T07:33:21Z User contributions MediaWiki 1.44.1 http://www.openhardwareconf.org/index.php?title=Main_Page&diff=716 2017-01-18T03:54:14Z

<p>Stuart Young: </p> <hr /> <div>{{DISPLAYTITLE:Open Hardware Miniconf}}<br /> <br /> '''The 2017 Open Hardware Miniconf has now concluded.'''<br /> <br /> Details for the [[OHC2017|Open Hardware Miniconf 2017]] and the hardware kit are at '''[[OHC2017]]'''. This includes details of software toolchains, github repos, assembly instructions, etc, that were used on the day. If you missed out on the day, have broken or need to reinstall your development environment, or are just interested in what this was all about, the info will still be here.<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] is a 1-day event that runs as a specialist stream within the [http://linux.conf.au/ linux.conf.au] conference. It gives participants an opportunity to learn basic hardware skills such as soldering, by assembling their own electronic project, and then the afternoon is filled with interesting talks about various projects and techniques related to the morning project and to open hardware in general.<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] began as the Arduino Miniconf in Wellington NZ in 2010 and has run every year since. Although Arduino is still a powerful and popular tool for learning about microcontroller development, the event has now grown in scope to cover broader Open Hardware topics including non-Arduino projects. In 2015, it took on its new identity as the [[OHC2017|Open Hardware Miniconf]] to reflect this broader interest.<br /> <br /> To give you some idea what to expect, this is the hardware assembly session at the LCA2016 Open Hardware Mini-Conference:<br /> <br /> [[File:OHMC2016a.jpg]]<br /> <br /> (Photo by [https://www.flickr.com/photos/geekscape Andy Gelme], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])<br /> <br /> After the assembly session is over the room is cleaned up a bit and the talks begin. It's a fun and educational event!<br /> <br /> Note: To attend you must first register for the main conference, which provides the venue. The [[OHC2017|Open Hardware Miniconf]] is part of LCA as a specialist stream for conference attendees: it's not a stand-alone event. See [http://linux.conf.au/ linux.conf.au] for more information.<br /> <br /> == Registration And Cost ==<br /> As there is usually a hardware build as part of hte Oen Hardware Miniconf, there is usually a registration that needs to be completed, and a cost for the kit. Details will be posted here once the next one is organised.<br /> <br /> As the OHMC is a linux.conf.au miniconference, attendance is free for linux.conf.au delegates, but if you wish to participate in the morning hardware assembly tutorial you will need to pre-register and purchase a kit. Space is limited so get in fast!<br /> <br /> If you just want to come along and watch or attend the talks, you don't need to do anything. If you wish to participate in the hardware assembly tutorial, please submit the registration form.<br /> <br /> See [[OHC2017|Open Hardware Miniconf 2017]] for more information.<br /> <br /> [[File:OHMC2016b.jpg|320px]]<br /> <br /> (Photo by [https://www.flickr.com/photos/geekscape Andy Gelme], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])<br /> <br /> == Previous Events ==<br /> <br /> For historical reference:<br /> <br /> * [[OHC2017|Open Hardware Miniconf 2017 (Hobart, Australia)]]<br /> * [[OHC2016|Open Hardware Miniconf 2016 (Geelong, Australia)]]<br /> * [[OHC2015|Open Hardware Miniconf 2015 (Auckland, New Zealand)]]<br /> * [[AMC2014|Arduino Miniconf 2014 (Perth, Australia)]]<br /> * [[AMC2013|Arduino Miniconf 2013 (Canberra, Australia)]]<br /> * [[AMC2012|Arduino Miniconf 2012 (Ballarat, Australia)]]<br /> * [[AMC2011|Arduino Miniconf 2011 (Brisbane, Australia)]]<br /> * [[AMC2010|Arduino Miniconf 2010 (Wellington, New Zealand)]]</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=Main_Page&diff=715 2017-01-18T03:45:37Z

<p>Stuart Young: </p> <hr /> <div>{{DISPLAYTITLE:Open Hardware Miniconf}}<br /> <br /> '''The 2017 Open Hardware Miniconf has now concluded.'''<br /> <br /> Details for the [[OHC2017|Open Hardware Miniconf 2017]] and the hardware kit are at '''[[OHC2017]]'''. This includes details of software toolchains, github repos, assembly instructions, etc, that were used on the day. If you missed out on the day, have broken or need to reinstall your development environment, or are just interested in what this was all about, the info will still be here.<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] is a 1-day event that runs as a specialist stream within the [http://linux.conf.au/ linux.conf.au] conference. It gives participants an opportunity to learn basic hardware skills such as soldering, by assembling their own electronic project, and then the afternoon is filled with interesting talks about various projects and techniques related to the morning project and to open hardware in general.<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] began as the Arduino Miniconf in Wellington NZ in 2010 and has run every year since. Although Arduino is still a powerful and popular tool for learning about microcontroller development, the event has now grown in scope to cover broader Open Hardware topics including non-Arduino projects. In 2015, it took on its new identity as the [[OHC2017|Open Hardware Miniconf]] to reflect this broader interest.<br /> <br /> To give you some idea what to expect, this is the hardware assembly session at the LCA2016 Open Hardware Mini-Conference:<br /> <br /> [[File:OHMC2016a.jpg]]<br /> <br /> (Photo by [https://www.flickr.com/photos/geekscape Andy Gelme], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])<br /> <br /> After the assembly session is over the room is cleaned up a bit and the talks begin. It's a fun and educational event!<br /> <br /> Note: To attend you must first register for the main conference, which provides the venue. The [[OHC2017|Open Hardware Miniconf]] is part of LCA as a specialist stream for conference attendees: it's not a stand-alone event. See [http://linux.conf.au/ linux.conf.au] for more information.<br /> <br /> == Registration And Cost ==<br /> You will need to [https://goo.gl/forms/tGUfEifPP1OZ37082 pre-register here] and purchase a kit, which will cost (no more than) AU$120.<br /> <br /> Attendance is free for linux.conf.au delegates, but if you wish to participate in the morning hardware assembly tutorial you will need to pre-register and purchase a kit. Space is limited so get in fast !<br /> <br /> If you just want to come along and watch or attend the talks, you don't need to do anything. If you wish to participate in the hardware assembly tutorial, please submit the registration form.<br /> <br /> See [[OHC2017|Open Hardware Miniconf 2017]] for more information.<br /> <br /> [[File:OHMC2016b.jpg|320px]]<br /> <br /> (Photo by [https://www.flickr.com/photos/geekscape Andy Gelme], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])<br /> <br /> == Previous Events ==<br /> <br /> For historical reference:<br /> <br /> * [[OHC2017|Open Hardware Miniconf 2017 (Hobart, Australia)]]<br /> * [[OHC2016|Open Hardware Miniconf 2016 (Geelong, Australia)]]<br /> * [[OHC2015|Open Hardware Miniconf 2015 (Auckland, New Zealand)]]<br /> * [[AMC2014|Arduino Miniconf 2014 (Perth, Australia)]]<br /> * [[AMC2013|Arduino Miniconf 2013 (Canberra, Australia)]]<br /> * [[AMC2012|Arduino Miniconf 2012 (Ballarat, Australia)]]<br /> * [[AMC2011|Arduino Miniconf 2011 (Brisbane, Australia)]]<br /> * [[AMC2010|Arduino Miniconf 2010 (Wellington, New Zealand)]]</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017&diff=714 2017-01-18T03:40:17Z

<p>Stuart Young: Post Miniconf changes</p> <hr /> <div>'''Quick information links used at OHMC2017:'''<br /> * Assembly: http://tinyurl.com/iotuz-assembly<br /> * Software: http://tinyurl.com/iotuz-software<br /> * Hardware: http://tinyurl.com/iotuz-hw<br /> * Firmware: http://tinyurl.com/iotuz-fw<br /> ** These links point to resources listed below, so if they break, don't fret.<br /> <br /> The Open Hardware Miniconf 2017 took place as part of [https://linux.conf.au/ LCA 2017] in Hobart, Tasmania, Australia.<br /> <br /> The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and &quot;maker culture&quot;. One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.<br /> <br /> Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.<br /> <br /> The day ran in two distinct halves. The first part of the day was a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day was a presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day. Due to the nature of the hardware project, we will be spending more time on presentations about the IoTuz hardware, software and getting the most out of it.<br /> <br /> == Venue ==<br /> <br /> The venue for OHMC2017 was '''[http://www.wrestpoint.com.au/conference/wellington-room-,facilities_viewItem_41-en.html Welliington room #2]''' at Wrestpoint.<br /> <br /> == Schedule ==<br /> <br /> Date: Tuesday 17th January 2017<br /> <br /> Project assembly in the morning followed by talks in the afternoon:<br /> <br /> * 10:40 - 10:50 '''Welcome &amp; Introduction'''<br /> * 10:50 - 12:20 '''IoTuz Assembly Workshop''' (registration required to participate, spectators also welcome)<br /> * 12:20 - 1:20 Lunch<br /> * 1:20 - 1:50 '''Angus Gratton''': ESP32 microcontroller hardware and software<br /> * 1:55 - 2:25 '''Bob Powers''': IoTuz hardware design, manufacturing, working with KiCad<br /> * 2:30 - 300 '''Mark Wolfe''': IoTuz software design challenges and ESP-IDF (Iot Development Framework)<br /> * 3:00 - 3:40 Afternoon Tea<br /> * 3:40 - 4:20 '''Nick Moore''': microPython for ESP32<br /> * 4:20 - 4:40 '''Andy Gelme''': ESP32 development example using IoTuz<br /> * 4:40 - 5:10 '''Lightning Talks''' (5 minutes)<br /> ** '''Tim Ansell''': I'm Tomu - A hobbyist device which fits inside your USB port<br /> ** '''Kristine Howard''': Granny was a hacker<br /> ** '''Marc Merlin''': How to row scan an 8x8 LED matrix<br /> ** '''Jill Rowling''': Alpaca fibre quality control<br /> ** '''Julien Goodwin''': USB-C features and a USB-PD project<br /> ** Spare slot<br /> * 5:10 - 5:20 '''Wrap Up '''<br /> <br /> === Lightning Talks ===<br /> <br /> '''Call for lightning talks now closed.'''<br /> <br /> == Call For Papers ==<br /> <br /> '''Call For Papers is now closed.'''<br /> <br /> == Accepted Papers ==<br /> <br /> '''See schedule above'''<br /> <br /> == Discussion Group ==<br /> <br /> There is a Google Group email list for discussion of topics related to the miniconf, including the assembly session:<br /> <br /> https://groups.google.com/forum/#!forum/open-hardware-conf<br /> <br /> == Assembly Project ==<br /> <br /> Each year we help attendees build a project specially developed for the Open Hardware Miniconf.<br /> <br /> The project for 2017 was '''IoTuz -The Internet of Tux'''<br /> <br /> The board is based around the '''ESP32''', which is the big brother successor to the '''ESP8266''' used in the ESPlant project in 2016. [http://hackaday.com/2016/09/15/esp32-hands-on-awesome-promise Hack-A-Day article describing the ESP32].<br /> <br /> Actual cost of the kit, just for LCA2017, is '''AU$100'''.<br /> <br /> Through hole parts on the board will be assembled on the day, with all the SMD parts being pre-loaded on the board. [https://github.com/CCHS-Melbourne/iotuz-esp32-hardware/tree/master/Documentation Assembly instructions]<br /> <br /> Repository for the project is on Github:<br /> *Hardware: https://github.com/CCHS-Melbourne/iotuz-esp32-hardware<br /> *Firmware: https://github.com/CCHS-Melbourne/iotuz-esp32-firmware<br /> <br /> The hardware kit includes ...<br /> * ESP-WROOM-32 module<br /> * 320 x 240 colour touchscreen<br /> * Joystick, rotary encoder (knob), buttons<br /> * 2x APA106 RGB LEDs (10 mm)<br /> * 3 axis accelerometer<br /> * Barometric pressure sensor<br /> * InfraRed transmitter / receiver<br /> * Audio circuit and speaker<br /> * LiPo battery and charge circuit<br /> * Easy access to IO pins .. alligator clip friendly<br /> <br /> ===Project (im)maturity===<br /> <br /> Regardless of your current level of experience and skill ... you will have an excellent day and walk away with working hardware and software. If you want to get in at the ground floor of the ESP32 developer community, then this is a great place to start. There will be some uncharted territory, some trail blazing and plenty of learning from our mistakes :)<br /> <br /> The hardware was initially tested by a short run of 4 prototype PCBs. Problems found were corrected for the production run. All the basics should work ... however, there is a chance that some modest hacking might be required, e.g cutting a track and adding wires.<br /> <br /> The ESP32 is very new and modules have only been available in very small quantities to select groups of people for a couple of months. EspressIf have been working (transparently via GitHub) on the RTOS, networking stack and peripheral drivers ... and the basics work, but there is much more work to do.<br /> <br /> ===Software===<br /> <br /> We've bundled together all the details for developing software on Github at:<br /> * [https://github.com/CCHS-Melbourne/iotuz-esp32-hardware/wiki/Software-Instructions IoTuz Dev Software Instructions]<br /> <br /> Note: These instructions were changed just before the [[OHC2017|Open Hardware Miniconf 2017]], so you will need to update any previous install you have made.<br /> <br /> [[File:IoTuz.png|Image 1]]<br /> <br /> Image 1. Rendered version of the board.<br /> <br /> <br /> <br /> [[File:IoTuz-display-working.jpg|Image 2]]<br /> <br /> Image 2. Working prototype (missing battery holder).</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=Main_Page&diff=713 2017-01-18T03:35:51Z

<p>Stuart Young: </p> <hr /> <div>{{DISPLAYTITLE:Open Hardware Miniconf}}<br /> <br /> '''[https://goo.gl/forms/tGUfEifPP1OZ37082 Registrations now CLOSED for the Open Hardware Miniconf 2017]'''<br /> <br /> '''To improve diversity and better representation, we have allocated 3 additional OHMC places for women attending LCA2017 (none left).'''<br /> <br /> '''We are still looking for one more talk and some lightning talks, if you are interested. Please see [[OHC2017-CFP]] for more information'''<br /> <br /> Details for the Open Hardware Miniconf 2017 and the hardware kit are at '''[[OHC2017]]'''<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] is a 1-day event that runs as a specialist stream within the [http://linux.conf.au/ linux.conf.au] conference. It gives participants an opportunity to learn basic hardware skills such as soldering, by assembling their own electronic project, and then the afternoon is filled with interesting talks about various projects and techniques related to the morning project and to open hardware in general.<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] began as the Arduino Miniconf in Wellington NZ in 2010 and has run every year since. Although Arduino is still a powerful and popular tool for learning about microcontroller development, the event has now grown in scope to cover broader Open Hardware topics including non-Arduino projects. In 2015, it took on its new identity as the [[OHC2017|Open Hardware Miniconf]] to reflect this broader interest.<br /> <br /> To give you some idea what to expect, this is the hardware assembly session at the LCA2016 Open Hardware Mini-Conference:<br /> <br /> [[File:OHMC2016a.jpg]]<br /> <br /> (Photo by [https://www.flickr.com/photos/geekscape Andy Gelme], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])<br /> <br /> After the assembly session is over the room is cleaned up a bit and the talks begin. It's a fun and educational event!<br /> <br /> Note: To attend you must first register for the main conference, which provides the venue. The [[OHC2017|Open Hardware Miniconf]] is part of LCA as a specialist stream for conference attendees: it's not a stand-alone event. See [http://linux.conf.au/ linux.conf.au] for more information.<br /> <br /> == Registration And Cost ==<br /> You will need to [https://goo.gl/forms/tGUfEifPP1OZ37082 pre-register here] and purchase a kit, which will cost (no more than) AU$120.<br /> <br /> Attendance is free for linux.conf.au delegates, but if you wish to participate in the morning hardware assembly tutorial you will need to pre-register and purchase a kit. Space is limited so get in fast !<br /> <br /> If you just want to come along and watch or attend the talks, you don't need to do anything. If you wish to participate in the hardware assembly tutorial, please submit the registration form.<br /> <br /> See [[OHC2017|Open Hardware Miniconf 2017]] for more information.<br /> <br /> [[File:OHMC2016b.jpg|320px]]<br /> <br /> (Photo by [https://www.flickr.com/photos/geekscape Andy Gelme], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])<br /> <br /> == Previous Events ==<br /> <br /> For historical reference:<br /> <br /> * [[OHC2017|Open Hardware Miniconf 2017 (Hobart, Australia)]]<br /> * [[OHC2016|Open Hardware Miniconf 2016 (Geelong, Australia)]]<br /> * [[OHC2015|Open Hardware Miniconf 2015 (Auckland, New Zealand)]]<br /> * [[AMC2014|Arduino Miniconf 2014 (Perth, Australia)]]<br /> * [[AMC2013|Arduino Miniconf 2013 (Canberra, Australia)]]<br /> * [[AMC2012|Arduino Miniconf 2012 (Ballarat, Australia)]]<br /> * [[AMC2011|Arduino Miniconf 2011 (Brisbane, Australia)]]<br /> * [[AMC2010|Arduino Miniconf 2010 (Wellington, New Zealand)]]</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=Main_Page&diff=712 2017-01-16T23:54:34Z

<p>Stuart Young: </p> <hr /> <div>{{DISPLAYTITLE:Open Hardware Miniconf}}<br /> <br /> '''Information for today's OHMC2017:'''<br /> * Assembly: http://tinyurl.com/iotuz-assembly<br /> * Software: http://tinyurl.com/iotuz-software<br /> * Hardware: http://tinyurl.com/iotuz-hw<br /> * Firmware: http://tinyurl.com/iotuz-fw<br /> * SSID: openhardware PSK: OHMC2017<br /> <br /> <br /> '''[https://goo.gl/forms/tGUfEifPP1OZ37082 Registrations now CLOSED for the Open Hardware Miniconf 2017]'''<br /> <br /> '''To improve diversity and better representation, we have allocated 3 additional OHMC places for women attending LCA2017 (none left).'''<br /> <br /> '''We are still looking for one more talk and some lightning talks, if you are interested. Please see [[OHC2017-CFP]] for more information'''<br /> <br /> Details for the Open Hardware Miniconf 2017 and the hardware kit are at '''[[OHC2017]]'''<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] is a 1-day event that runs as a specialist stream within the [http://linux.conf.au/ linux.conf.au] conference. It gives participants an opportunity to learn basic hardware skills such as soldering, by assembling their own electronic project, and then the afternoon is filled with interesting talks about various projects and techniques related to the morning project and to open hardware in general.<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] began as the Arduino Miniconf in Wellington NZ in 2010 and has run every year since. Although Arduino is still a powerful and popular tool for learning about microcontroller development, the event has now grown in scope to cover broader Open Hardware topics including non-Arduino projects. In 2015, it took on its new identity as the [[OHC2017|Open Hardware Miniconf]] to reflect this broader interest.<br /> <br /> To give you some idea what to expect, this is the hardware assembly session at the LCA2016 Open Hardware Mini-Conference:<br /> <br /> [[File:OHMC2016a.jpg]]<br /> <br /> (Photo by [https://www.flickr.com/photos/geekscape Andy Gelme], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])<br /> <br /> After the assembly session is over the room is cleaned up a bit and the talks begin. It's a fun and educational event!<br /> <br /> Note: To attend you must first register for the main conference, which provides the venue. The [[OHC2017|Open Hardware Miniconf]] is part of LCA as a specialist stream for conference attendees: it's not a stand-alone event. See [http://linux.conf.au/ linux.conf.au] for more information.<br /> <br /> == Registration And Cost ==<br /> You will need to [https://goo.gl/forms/tGUfEifPP1OZ37082 pre-register here] and purchase a kit, which will cost (no more than) AU$120.<br /> <br /> Attendance is free for linux.conf.au delegates, but if you wish to participate in the morning hardware assembly tutorial you will need to pre-register and purchase a kit. Space is limited so get in fast !<br /> <br /> If you just want to come along and watch or attend the talks, you don't need to do anything. If you wish to participate in the hardware assembly tutorial, please submit the registration form.<br /> <br /> See [[OHC2017|Open Hardware Miniconf 2017]] for more information.<br /> <br /> [[File:OHMC2016b.jpg|320px]]<br /> <br /> (Photo by [https://www.flickr.com/photos/geekscape Andy Gelme], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])<br /> <br /> == Previous Events ==<br /> <br /> For historical reference:<br /> <br /> * [[OHC2017|Open Hardware Miniconf 2017 (Hobart, Australia)]]<br /> * [[OHC2016|Open Hardware Miniconf 2016 (Geelong, Australia)]]<br /> * [[OHC2015|Open Hardware Miniconf 2015 (Auckland, New Zealand)]]<br /> * [[AMC2014|Arduino Miniconf 2014 (Perth, Australia)]]<br /> * [[AMC2013|Arduino Miniconf 2013 (Canberra, Australia)]]<br /> * [[AMC2012|Arduino Miniconf 2012 (Ballarat, Australia)]]<br /> * [[AMC2011|Arduino Miniconf 2011 (Brisbane, Australia)]]<br /> * [[AMC2010|Arduino Miniconf 2010 (Wellington, New Zealand)]]</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=Main_Page&diff=711 2017-01-16T23:53:55Z

<p>Stuart Young: </p> <hr /> <div>{{DISPLAYTITLE:Open Hardware Miniconf}}<br /> <br /> '''Information for todays OHMC2017:'''<br /> * Assembly: http://tinyurl.com/iotuz-assembly<br /> * Software: http://tinyurl.com/iotuz-software<br /> * Hardware: http://tinyurl.com/iotuz-hw<br /> * Firmware: http://tinyurl.com/iotuz-fw<br /> * SSID: openhardware PSK: OHMC2017<br /> <br /> <br /> '''[https://goo.gl/forms/tGUfEifPP1OZ37082 Registrations now CLOSED for the Open Hardware Miniconf 2017]'''<br /> <br /> '''To improve diversity and better representation, we have allocated 3 additional OHMC places for women attending LCA2017 (none left).'''<br /> <br /> '''We are still looking for one more talk and some lightning talks, if you are interested. Please see [[OHC2017-CFP]] for more information'''<br /> <br /> Details for the Open Hardware Miniconf 2017 and the hardware kit are at '''[[OHC2017]]'''<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] is a 1-day event that runs as a specialist stream within the [http://linux.conf.au/ linux.conf.au] conference. It gives participants an opportunity to learn basic hardware skills such as soldering, by assembling their own electronic project, and then the afternoon is filled with interesting talks about various projects and techniques related to the morning project and to open hardware in general.<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] began as the Arduino Miniconf in Wellington NZ in 2010 and has run every year since. Although Arduino is still a powerful and popular tool for learning about microcontroller development, the event has now grown in scope to cover broader Open Hardware topics including non-Arduino projects. In 2015, it took on its new identity as the [[OHC2017|Open Hardware Miniconf]] to reflect this broader interest.<br /> <br /> To give you some idea what to expect, this is the hardware assembly session at the LCA2016 Open Hardware Mini-Conference:<br /> <br /> [[File:OHMC2016a.jpg]]<br /> <br /> (Photo by [https://www.flickr.com/photos/geekscape Andy Gelme], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])<br /> <br /> After the assembly session is over the room is cleaned up a bit and the talks begin. It's a fun and educational event!<br /> <br /> Note: To attend you must first register for the main conference, which provides the venue. The [[OHC2017|Open Hardware Miniconf]] is part of LCA as a specialist stream for conference attendees: it's not a stand-alone event. See [http://linux.conf.au/ linux.conf.au] for more information.<br /> <br /> == Registration And Cost ==<br /> You will need to [https://goo.gl/forms/tGUfEifPP1OZ37082 pre-register here] and purchase a kit, which will cost (no more than) AU$120.<br /> <br /> Attendance is free for linux.conf.au delegates, but if you wish to participate in the morning hardware assembly tutorial you will need to pre-register and purchase a kit. Space is limited so get in fast !<br /> <br /> If you just want to come along and watch or attend the talks, you don't need to do anything. If you wish to participate in the hardware assembly tutorial, please submit the registration form.<br /> <br /> See [[OHC2017|Open Hardware Miniconf 2017]] for more information.<br /> <br /> [[File:OHMC2016b.jpg|320px]]<br /> <br /> (Photo by [https://www.flickr.com/photos/geekscape Andy Gelme], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])<br /> <br /> == Previous Events ==<br /> <br /> For historical reference:<br /> <br /> * [[OHC2017|Open Hardware Miniconf 2017 (Hobart, Australia)]]<br /> * [[OHC2016|Open Hardware Miniconf 2016 (Geelong, Australia)]]<br /> * [[OHC2015|Open Hardware Miniconf 2015 (Auckland, New Zealand)]]<br /> * [[AMC2014|Arduino Miniconf 2014 (Perth, Australia)]]<br /> * [[AMC2013|Arduino Miniconf 2013 (Canberra, Australia)]]<br /> * [[AMC2012|Arduino Miniconf 2012 (Ballarat, Australia)]]<br /> * [[AMC2011|Arduino Miniconf 2011 (Brisbane, Australia)]]<br /> * [[AMC2010|Arduino Miniconf 2010 (Wellington, New Zealand)]]</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=Main_Page&diff=710 2017-01-16T23:52:44Z

<p>Stuart Young: </p> <hr /> <div>{{DISPLAYTITLE:Open Hardware Miniconf}}<br /> <br /> '''Links for todays OHMC2017:'''<br /> * Assembly: http://tinyurl.com/iotuz-assembly<br /> * Software: http://tinyurl.com/iotuz-software<br /> * Hardware: http://tinyurl.com/iotuz-hw<br /> * Firmware: http://tinyurl.com/iotuz-fw<br /> <br /> <br /> '''[https://goo.gl/forms/tGUfEifPP1OZ37082 Registrations now CLOSED for the Open Hardware Miniconf 2017]'''<br /> <br /> '''To improve diversity and better representation, we have allocated 3 additional OHMC places for women attending LCA2017 (none left).'''<br /> <br /> '''We are still looking for one more talk and some lightning talks, if you are interested. Please see [[OHC2017-CFP]] for more information'''<br /> <br /> Details for the Open Hardware Miniconf 2017 and the hardware kit are at '''[[OHC2017]]'''<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] is a 1-day event that runs as a specialist stream within the [http://linux.conf.au/ linux.conf.au] conference. It gives participants an opportunity to learn basic hardware skills such as soldering, by assembling their own electronic project, and then the afternoon is filled with interesting talks about various projects and techniques related to the morning project and to open hardware in general.<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] began as the Arduino Miniconf in Wellington NZ in 2010 and has run every year since. Although Arduino is still a powerful and popular tool for learning about microcontroller development, the event has now grown in scope to cover broader Open Hardware topics including non-Arduino projects. In 2015, it took on its new identity as the [[OHC2017|Open Hardware Miniconf]] to reflect this broader interest.<br /> <br /> To give you some idea what to expect, this is the hardware assembly session at the LCA2016 Open Hardware Mini-Conference:<br /> <br /> [[File:OHMC2016a.jpg]]<br /> <br /> (Photo by [https://www.flickr.com/photos/geekscape Andy Gelme], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])<br /> <br /> After the assembly session is over the room is cleaned up a bit and the talks begin. It's a fun and educational event!<br /> <br /> Note: To attend you must first register for the main conference, which provides the venue. The [[OHC2017|Open Hardware Miniconf]] is part of LCA as a specialist stream for conference attendees: it's not a stand-alone event. See [http://linux.conf.au/ linux.conf.au] for more information.<br /> <br /> == Registration And Cost ==<br /> You will need to [https://goo.gl/forms/tGUfEifPP1OZ37082 pre-register here] and purchase a kit, which will cost (no more than) AU$120.<br /> <br /> Attendance is free for linux.conf.au delegates, but if you wish to participate in the morning hardware assembly tutorial you will need to pre-register and purchase a kit. Space is limited so get in fast !<br /> <br /> If you just want to come along and watch or attend the talks, you don't need to do anything. If you wish to participate in the hardware assembly tutorial, please submit the registration form.<br /> <br /> See [[OHC2017|Open Hardware Miniconf 2017]] for more information.<br /> <br /> [[File:OHMC2016b.jpg|320px]]<br /> <br /> (Photo by [https://www.flickr.com/photos/geekscape Andy Gelme], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])<br /> <br /> == Previous Events ==<br /> <br /> For historical reference:<br /> <br /> * [[OHC2017|Open Hardware Miniconf 2017 (Hobart, Australia)]]<br /> * [[OHC2016|Open Hardware Miniconf 2016 (Geelong, Australia)]]<br /> * [[OHC2015|Open Hardware Miniconf 2015 (Auckland, New Zealand)]]<br /> * [[AMC2014|Arduino Miniconf 2014 (Perth, Australia)]]<br /> * [[AMC2013|Arduino Miniconf 2013 (Canberra, Australia)]]<br /> * [[AMC2012|Arduino Miniconf 2012 (Ballarat, Australia)]]<br /> * [[AMC2011|Arduino Miniconf 2011 (Brisbane, Australia)]]<br /> * [[AMC2010|Arduino Miniconf 2010 (Wellington, New Zealand)]]</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017&diff=708 2017-01-16T10:09:31Z

<p>Stuart Young: /* Software */</p> <hr /> <div>'''[https://goo.gl/forms/tGUfEifPP1OZ37082 Registrations now CLOSED for the Open Hardware Miniconf 2017]'''<br /> <br /> '''To improve diversity and better representation, we have allocated 3 additional OHMC places for women attending LCA2017 (none left).'''<br /> <br /> The Open Hardware Miniconf 2017 will take place as part of [https://linux.conf.au/ LCA 2017] in Hobart, Tasmania, Australia.<br /> <br /> The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and &quot;maker culture&quot;. One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.<br /> <br /> Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.<br /> <br /> The day will run in two distinct halves. The first part of the day will be a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day will be presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day. Due to the nature of the hardware project, we will be spending more time on presentations about the IoTuz hardware, software and getting the most out of it.<br /> <br /> == Venue ==<br /> <br /> We are pleased to announce that we'll be running OHMC2017 in '''[http://www.wrestpoint.com.au/conference/wellington-room-,facilities_viewItem_41-en.html Welliington room #2]''' at Wrestpoint.<br /> <br /> == Schedule ==<br /> <br /> Date: Tuesday 17th January 2017<br /> <br /> Project assembly in the morning followed by talks in the afternoon:<br /> <br /> * 10:40 - 10:50 '''Welcome &amp; Introduction'''<br /> * 10:50 - 12:20 '''IoTuz Assembly Workshop''' (registration required to participate, spectators also welcome)<br /> * 12:20 - 1:20 Lunch<br /> * 1:20 - 1:50 '''Angus Gratton''': ESP32 microcontroller hardware and software<br /> * 1:55 - 2:25 '''Bob Powers''': IoTuz hardware design, manufacturing, working with KiCad<br /> * 2:30 - 300 '''Mark Wolfe''': IoTuz software design challenges and ESP-IDF (Iot Development Framework)<br /> * 3:00 - 3:40 Afternoon Tea<br /> * 3:40 - 4:20 '''Nick Moore''': microPython for ESP32<br /> * 4:20 - 4:40 '''Andy Gelme''': ESP32 development example using IoTuz<br /> * 4:40 - 5:10 '''Lightning Talks''' (5 minutes)<br /> ** '''Tim Ansell''': I'm Tomu - A hobbyist device which fits inside your USB port<br /> ** '''Kristine Howard''': Granny was a hacker<br /> ** '''Marc Merlin''': How to row scan an 8x8 LED matrix<br /> ** '''Jill Rowling''': Alpaca fibre quality control<br /> ** '''Julien Goodwin''': USB-C features and a USB-PD project<br /> ** Spare slot<br /> * 5:10 - 5:20 '''Wrap Up '''<br /> <br /> === Lightning Talks ===<br /> <br /> * If you'd like to present a 5 minute lightning talk, please email [mailto:andyg@geekscape.org andyg@geekscape.org]<br /> <br /> == Call For Papers ==<br /> <br /> '''Call For Papers is now closed.'''<br /> <br /> == Accepted Papers ==<br /> <br /> '''To be announced.'''<br /> <br /> == Discussion Group ==<br /> <br /> There is a Google Group email list for discussion of topics related to the miniconf, including the assembly session:<br /> <br /> https://groups.google.com/forum/#!forum/open-hardware-conf<br /> <br /> == Assembly Project ==<br /> <br /> Each year we help attendees build a project specially developed for the Open Hardware Miniconf.<br /> <br /> The project this year is called '''IoTuz -The Internet of Tux'''<br /> <br /> The board is based around the '''ESP32''', which is the big brother successor to the '''ESP8266''' used in the ESPlant project in 2016. [http://hackaday.com/2016/09/15/esp32-hands-on-awesome-promise Hack-A-Day article describing the ESP32].<br /> <br /> Actual cost of the kit, just for LCA2017, is '''AU$100'''.<br /> <br /> Through hole parts on the board will be assembled on the day, with all the SMD parts being pre-loaded on the board. [https://github.com/CCHS-Melbourne/iotuz-esp32-hardware/tree/master/Documentation Assembly instructions]<br /> <br /> Repository for the project is on Github:<br /> *Hardware: https://github.com/CCHS-Melbourne/iotuz-esp32-hardware<br /> *Firmware: https://github.com/CCHS-Melbourne/iotuz-esp32-firmware<br /> <br /> The hardware kit includes ...<br /> * ESP-WROOM-32 module<br /> * 320 x 240 colour touchscreen<br /> * Joystick, rotary encoder (knob), buttons<br /> * 2x APA106 RGB LEDs (10 mm)<br /> * 3 axis accelerometer<br /> * Barometric pressure sensor<br /> * InfraRed transmitter / receiver<br /> * Audio circuit and speaker<br /> * LiPo battery and charge circuit<br /> * Easy access to IO pins .. alligator clip friendly<br /> <br /> ===Project (im)maturity===<br /> <br /> Regardless of your current level of experience and skill ... you will have an excellent day and walk away with working hardware and software. If you want to get in at the ground floor of the ESP32 developer community, then this is a great place to start. There will be some uncharted territory, some trail blazing and plenty of learning from our mistakes :)<br /> <br /> The hardware was initially tested by a short run of 4 prototype PCBs. Problems found were corrected for the production run. All the basics should work ... however, there is a chance that some modest hacking might be required, e.g cutting a track and adding wires.<br /> <br /> The ESP32 is very new and modules have only been available in very small quantities to select groups of people for a couple of months. EspressIf have been working (transparently via GitHub) on the RTOS, networking stack and peripheral drivers ... and the basics work, but there is much more work to do.<br /> <br /> ===Software===<br /> <br /> We've bundled together all the details for developing software on Github at:<br /> * [https://github.com/CCHS-Melbourne/iotuz-esp32-hardware/wiki/Software-Instructions IoTuz Dev Software Instructions]<br /> <br /> Note: These instructions were changed just before the [[OHC2017|Open Hardware Miniconf 2017]], so you will need to update any previous install you have made.<br /> <br /> [[File:IoTuz.png|Image 1]]<br /> <br /> Image 1. Rendered version of the board.<br /> <br /> <br /> <br /> [[File:IoTuz-display-working.jpg|Image 2]]<br /> <br /> Image 2. Working prototype (missing battery holder).</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017&diff=707 2017-01-16T10:08:25Z

<p>Stuart Young: /* Assembly Project */</p> <hr /> <div>'''[https://goo.gl/forms/tGUfEifPP1OZ37082 Registrations now CLOSED for the Open Hardware Miniconf 2017]'''<br /> <br /> '''To improve diversity and better representation, we have allocated 3 additional OHMC places for women attending LCA2017 (none left).'''<br /> <br /> The Open Hardware Miniconf 2017 will take place as part of [https://linux.conf.au/ LCA 2017] in Hobart, Tasmania, Australia.<br /> <br /> The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and &quot;maker culture&quot;. One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.<br /> <br /> Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.<br /> <br /> The day will run in two distinct halves. The first part of the day will be a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day will be presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day. Due to the nature of the hardware project, we will be spending more time on presentations about the IoTuz hardware, software and getting the most out of it.<br /> <br /> == Venue ==<br /> <br /> We are pleased to announce that we'll be running OHMC2017 in '''[http://www.wrestpoint.com.au/conference/wellington-room-,facilities_viewItem_41-en.html Welliington room #2]''' at Wrestpoint.<br /> <br /> == Schedule ==<br /> <br /> Date: Tuesday 17th January 2017<br /> <br /> Project assembly in the morning followed by talks in the afternoon:<br /> <br /> * 10:40 - 10:50 '''Welcome &amp; Introduction'''<br /> * 10:50 - 12:20 '''IoTuz Assembly Workshop''' (registration required to participate, spectators also welcome)<br /> * 12:20 - 1:20 Lunch<br /> * 1:20 - 1:50 '''Angus Gratton''': ESP32 microcontroller hardware and software<br /> * 1:55 - 2:25 '''Bob Powers''': IoTuz hardware design, manufacturing, working with KiCad<br /> * 2:30 - 300 '''Mark Wolfe''': IoTuz software design challenges and ESP-IDF (Iot Development Framework)<br /> * 3:00 - 3:40 Afternoon Tea<br /> * 3:40 - 4:20 '''Nick Moore''': microPython for ESP32<br /> * 4:20 - 4:40 '''Andy Gelme''': ESP32 development example using IoTuz<br /> * 4:40 - 5:10 '''Lightning Talks''' (5 minutes)<br /> ** '''Tim Ansell''': I'm Tomu - A hobbyist device which fits inside your USB port<br /> ** '''Kristine Howard''': Granny was a hacker<br /> ** '''Marc Merlin''': How to row scan an 8x8 LED matrix<br /> ** '''Jill Rowling''': Alpaca fibre quality control<br /> ** '''Julien Goodwin''': USB-C features and a USB-PD project<br /> ** Spare slot<br /> * 5:10 - 5:20 '''Wrap Up '''<br /> <br /> === Lightning Talks ===<br /> <br /> * If you'd like to present a 5 minute lightning talk, please email [mailto:andyg@geekscape.org andyg@geekscape.org]<br /> <br /> == Call For Papers ==<br /> <br /> '''Call For Papers is now closed.'''<br /> <br /> == Accepted Papers ==<br /> <br /> '''To be announced.'''<br /> <br /> == Discussion Group ==<br /> <br /> There is a Google Group email list for discussion of topics related to the miniconf, including the assembly session:<br /> <br /> https://groups.google.com/forum/#!forum/open-hardware-conf<br /> <br /> == Assembly Project ==<br /> <br /> Each year we help attendees build a project specially developed for the Open Hardware Miniconf.<br /> <br /> The project this year is called '''IoTuz -The Internet of Tux'''<br /> <br /> The board is based around the '''ESP32''', which is the big brother successor to the '''ESP8266''' used in the ESPlant project in 2016. [http://hackaday.com/2016/09/15/esp32-hands-on-awesome-promise Hack-A-Day article describing the ESP32].<br /> <br /> Actual cost of the kit, just for LCA2017, is '''AU$100'''.<br /> <br /> Through hole parts on the board will be assembled on the day, with all the SMD parts being pre-loaded on the board. [https://github.com/CCHS-Melbourne/iotuz-esp32-hardware/tree/master/Documentation Assembly instructions]<br /> <br /> Repository for the project is on Github:<br /> *Hardware: https://github.com/CCHS-Melbourne/iotuz-esp32-hardware<br /> *Firmware: https://github.com/CCHS-Melbourne/iotuz-esp32-firmware<br /> <br /> The hardware kit includes ...<br /> * ESP-WROOM-32 module<br /> * 320 x 240 colour touchscreen<br /> * Joystick, rotary encoder (knob), buttons<br /> * 2x APA106 RGB LEDs (10 mm)<br /> * 3 axis accelerometer<br /> * Barometric pressure sensor<br /> * InfraRed transmitter / receiver<br /> * Audio circuit and speaker<br /> * LiPo battery and charge circuit<br /> * Easy access to IO pins .. alligator clip friendly<br /> <br /> ===Project (im)maturity===<br /> <br /> Regardless of your current level of experience and skill ... you will have an excellent day and walk away with working hardware and software. If you want to get in at the ground floor of the ESP32 developer community, then this is a great place to start. There will be some uncharted territory, some trail blazing and plenty of learning from our mistakes :)<br /> <br /> The hardware was initially tested by a short run of 4 prototype PCBs. Problems found were corrected for the production run. All the basics should work ... however, there is a chance that some modest hacking might be required, e.g cutting a track and adding wires.<br /> <br /> The ESP32 is very new and modules have only been available in very small quantities to select groups of people for a couple of months. EspressIf have been working (transparently via GitHub) on the RTOS, networking stack and peripheral drivers ... and the basics work, but there is much more work to do.<br /> <br /> ===Software===<br /> <br /> We've bundled together all the details for developing software on Github at:<br /> * [https://github.com/CCHS-Melbourne/iotuz-esp32-hardware/wiki/Software-Instructions IoTuz Software Instructions]<br /> <br /> Note: These instructions were changed just before the [[OHC2017|Open Hardware Miniconf 2017]], so you will need to update any previous install you have made.<br /> <br /> [[File:IoTuz.png|Image 1]]<br /> <br /> Image 1. Rendered version of the board.<br /> <br /> <br /> <br /> [[File:IoTuz-display-working.jpg|Image 2]]<br /> <br /> Image 2. Working prototype (missing battery holder).</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017&diff=706 2017-01-16T10:07:09Z

<p>Stuart Young: </p> <hr /> <div>'''[https://goo.gl/forms/tGUfEifPP1OZ37082 Registrations now CLOSED for the Open Hardware Miniconf 2017]'''<br /> <br /> '''To improve diversity and better representation, we have allocated 3 additional OHMC places for women attending LCA2017 (none left).'''<br /> <br /> The Open Hardware Miniconf 2017 will take place as part of [https://linux.conf.au/ LCA 2017] in Hobart, Tasmania, Australia.<br /> <br /> The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and &quot;maker culture&quot;. One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.<br /> <br /> Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.<br /> <br /> The day will run in two distinct halves. The first part of the day will be a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day will be presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day. Due to the nature of the hardware project, we will be spending more time on presentations about the IoTuz hardware, software and getting the most out of it.<br /> <br /> == Venue ==<br /> <br /> We are pleased to announce that we'll be running OHMC2017 in '''[http://www.wrestpoint.com.au/conference/wellington-room-,facilities_viewItem_41-en.html Welliington room #2]''' at Wrestpoint.<br /> <br /> == Schedule ==<br /> <br /> Date: Tuesday 17th January 2017<br /> <br /> Project assembly in the morning followed by talks in the afternoon:<br /> <br /> * 10:40 - 10:50 '''Welcome &amp; Introduction'''<br /> * 10:50 - 12:20 '''IoTuz Assembly Workshop''' (registration required to participate, spectators also welcome)<br /> * 12:20 - 1:20 Lunch<br /> * 1:20 - 1:50 '''Angus Gratton''': ESP32 microcontroller hardware and software<br /> * 1:55 - 2:25 '''Bob Powers''': IoTuz hardware design, manufacturing, working with KiCad<br /> * 2:30 - 300 '''Mark Wolfe''': IoTuz software design challenges and ESP-IDF (Iot Development Framework)<br /> * 3:00 - 3:40 Afternoon Tea<br /> * 3:40 - 4:20 '''Nick Moore''': microPython for ESP32<br /> * 4:20 - 4:40 '''Andy Gelme''': ESP32 development example using IoTuz<br /> * 4:40 - 5:10 '''Lightning Talks''' (5 minutes)<br /> ** '''Tim Ansell''': I'm Tomu - A hobbyist device which fits inside your USB port<br /> ** '''Kristine Howard''': Granny was a hacker<br /> ** '''Marc Merlin''': How to row scan an 8x8 LED matrix<br /> ** '''Jill Rowling''': Alpaca fibre quality control<br /> ** '''Julien Goodwin''': USB-C features and a USB-PD project<br /> ** Spare slot<br /> * 5:10 - 5:20 '''Wrap Up '''<br /> <br /> === Lightning Talks ===<br /> <br /> * If you'd like to present a 5 minute lightning talk, please email [mailto:andyg@geekscape.org andyg@geekscape.org]<br /> <br /> == Call For Papers ==<br /> <br /> '''Call For Papers is now closed.'''<br /> <br /> == Accepted Papers ==<br /> <br /> '''To be announced.'''<br /> <br /> == Discussion Group ==<br /> <br /> There is a Google Group email list for discussion of topics related to the miniconf, including the assembly session:<br /> <br /> https://groups.google.com/forum/#!forum/open-hardware-conf<br /> <br /> == Assembly Project ==<br /> <br /> Each year we help attendees build a project specially developed for the Open Hardware Miniconf.<br /> <br /> The project this year is called '''IoTuz -The Internet of Tux'''<br /> <br /> The board is based around the '''ESP32''', which is the big brother successor to the '''ESP8266''' used in the ESPlant project in 2016. [http://hackaday.com/2016/09/15/esp32-hands-on-awesome-promise Hack-A-Day article describing the ESP32].<br /> <br /> Actual cost of the kit, just for LCA2017, is '''AU$100'''.<br /> <br /> Through hole parts on the board will be assembled on the day, with all the SMD parts being pre-loaded on the board. [https://github.com/CCHS-Melbourne/iotuz-esp32-hardware/tree/master/Documentation Assembly instructions]<br /> <br /> Repository for the project is on Github:<br /> Hardware: https://github.com/CCHS-Melbourne/iotuz-esp32-hardware<br /> Firmware: https://github.com/CCHS-Melbourne/iotuz-esp32-firmware<br /> <br /> The hardware kit includes ...<br /> * ESP-WROOM-32 module<br /> * 320 x 240 colour touchscreen<br /> * Joystick, rotary encoder (knob), buttons<br /> * 2x APA106 RGB LEDs (10 mm)<br /> * 3 axis accelerometer<br /> * Barometric pressure sensor<br /> * InfraRed transmitter / receiver<br /> * Audio circuit and speaker<br /> * LiPo battery and charge circuit<br /> * Easy access to IO pins .. alligator clip friendly<br /> <br /> ===Project (im)maturity===<br /> <br /> Regardless of your current level of experience and skill ... you will have an excellent day and walk away with working hardware and software. If you want to get in at the ground floor of the ESP32 developer community, then this is a great place to start. There will be some uncharted territory, some trail blazing and plenty of learning from our mistakes :)<br /> <br /> The hardware was initially tested by a short run of 4 prototype PCBs. Problems found were corrected for the production run. All the basics should work ... however, there is a chance that some modest hacking might be required, e.g cutting a track and adding wires.<br /> <br /> The ESP32 is very new and modules have only been available in very small quantities to select groups of people for a couple of months. EspressIf have been working (transparently via GitHub) on the RTOS, networking stack and peripheral drivers ... and the basics work, but there is much more work to do.<br /> <br /> ===Software===<br /> <br /> We've bundled together all the details for developing software on Github at:<br /> * [https://github.com/CCHS-Melbourne/iotuz-esp32-hardware/wiki/Software-Instructions IoTuz Software Instructions]<br /> <br /> Note: These instructions were changed just before the [[OHC2017|Open Hardware Miniconf 2017]], so you will need to update any previous install you have made.<br /> <br /> [[File:IoTuz.png|Image 1]]<br /> <br /> Image 1. Rendered version of the board.<br /> <br /> <br /> <br /> [[File:IoTuz-display-working.jpg|Image 2]]<br /> <br /> Image 2. Working prototype (missing battery holder).</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017&diff=705 2017-01-16T09:01:30Z

<p>Stuart Young: /* Assembly Project */</p> <hr /> <div>'''[https://goo.gl/forms/tGUfEifPP1OZ37082 Registrations now CLOSED for the Open Hardware Miniconf 2017]'''<br /> <br /> '''To improve diversity and better representation, we have allocated 3 additional OHMC places for women attending LCA2017 (none left).'''<br /> <br /> The Open Hardware Miniconf 2017 will take place as part of [https://linux.conf.au/ LCA 2017] in Hobart, Tasmania, Australia.<br /> <br /> The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and &quot;maker culture&quot;. One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.<br /> <br /> Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.<br /> <br /> The day will run in two distinct halves. The first part of the day will be a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day will be presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day. Due to the nature of the hardware project, we will be spending more time on presentations about the IoTuz hardware, software and getting the most out of it.<br /> <br /> == Venue ==<br /> <br /> We are pleased to announce that we'll be running OHMC2017 in '''[http://www.wrestpoint.com.au/conference/wellington-room-,facilities_viewItem_41-en.html Welliington room #2]''' at Wrestpoint.<br /> <br /> == Schedule ==<br /> <br /> Date: Tuesday 17th January 2017<br /> <br /> Project assembly in the morning followed by talks in the afternoon:<br /> <br /> * 10:40 - 10:50 '''Welcome &amp; Introduction'''<br /> * 10:50 - 12:20 '''IoTuz Assembly Workshop''' (registration required to participate, spectators also welcome)<br /> * 12:20 - 1:20 Lunch<br /> * 1:20 - 1:50 '''Angus Gratton''': ESP32 microcontroller hardware and software<br /> * 1:55 - 2:25 '''Bob Powers''': IoTuz hardware design, manufacturing, working with KiCad<br /> * 2:30 - 300 '''Mark Wolfe''': IoTuz software design challenges and ESP-IDF (Iot Development Framework)<br /> * 3:00 - 3:40 Afternoon Tea<br /> * 3:40 - 4:20 '''Nick Moore''': microPython for ESP32<br /> * 4:20 - 4:40 '''Andy Gelme''': ESP32 development example using IoTuz<br /> * 4:40 - 5:10 '''Lightning Talks''' (5 minutes)<br /> ** '''Tim Ansell''': I'm Tomu - A hobbyist device which fits inside your USB port<br /> ** '''Kristine Howard''': Granny was a hacker<br /> ** '''Marc Merlin''': How to row scan an 8x8 LED matrix<br /> ** '''Jill Rowling''': Alpaca fibre quality control<br /> ** '''Julien Goodwin''': USB-C features and a USB-PD project<br /> ** Spare slot<br /> * 5:10 - 5:20 '''Wrap Up '''<br /> <br /> === Lightning Talks ===<br /> <br /> * If you'd like to present a 5 minute lightning talk, please email [mailto:andyg@geekscape.org andyg@geekscape.org]<br /> <br /> == Call For Papers ==<br /> <br /> '''Call For Papers is now closed.'''<br /> <br /> == Accepted Papers ==<br /> <br /> '''To be announced.'''<br /> <br /> == Discussion Group ==<br /> <br /> There is a Google Group email list for discussion of topics related to the miniconf, including the assembly session:<br /> <br /> https://groups.google.com/forum/#!forum/open-hardware-conf<br /> <br /> == Assembly Project ==<br /> <br /> Each year we help attendees build a project specially developed for the Open Hardware Miniconf.<br /> <br /> The project this year is called '''IoTuz -The Internet of Tux'''<br /> <br /> The board is based around the '''ESP32''', which is the big brother successor to the '''ESP8266''' used in the ESPlant project in 2016. [http://hackaday.com/2016/09/15/esp32-hands-on-awesome-promise Hack-A-Day article describing the ESP32].<br /> <br /> Actual cost of the kit, just for LCA2017, is '''AU$100'''.<br /> <br /> Through hole parts on the board will be assembled on the day, with all the SMD parts being pre-loaded on the board. [https://github.com/CCHS-Melbourne/IoTuz/tree/master/Documentation Assembly instructions]<br /> <br /> Repository for the project is on Github: https://github.com/CCHS-Melbourne/IoTuz<br /> <br /> The hardware kit includes ...<br /> * ESP-WROOM-32 module<br /> * 320 x 240 colour touchscreen<br /> * Joystick, rotary encoder (knob), buttons<br /> * 2x APA106 RGB LEDs (10 mm)<br /> * 3 axis accelerometer<br /> * Barometric pressure sensor<br /> * InfraRed transmitter / receiver<br /> * Audio circuit and speaker<br /> * LiPo battery and charge circuit<br /> * Easy access to IO pins .. alligator clip friendly<br /> <br /> ===Project (im)maturity===<br /> <br /> Regardless of your current level of experience and skill ... you will have an excellent day and walk away with working hardware and software. If you want to get in at the ground floor of the ESP32 developer community, then this is a great place to start. There will be some uncharted territory, some trail blazing and plenty of learning from our mistakes :)<br /> <br /> The hardware was initially tested by a short run of 4 prototype PCBs. Problems found were corrected for the production run. All the basics should work ... however, there is a chance that some modest hacking might be required, e.g cutting a track and adding wires.<br /> <br /> The ESP32 is very new and modules have only been available in very small quantities to select groups of people for a couple of months. EspressIf have been working (transparently via GitHub) on the RTOS, networking stack and peripheral drivers ... and the basics work, but there is much more work to do.<br /> <br /> ===Software===<br /> <br /> We've bundled together all the details for developing software on Github at:<br /> * [https://github.com/CCHS-Melbourne/IoTuz/wiki/Software-Instructions IoTuz Software Instructions]<br /> <br /> Note: These instructions were changed just before the [[OHC2017|Open Hardware Miniconf 2017]], so you will need to update any previous install you have made.<br /> <br /> [[File:IoTuz.png|Image 1]]<br /> <br /> Image 1. Rendered version of the board.<br /> <br /> <br /> <br /> [[File:IoTuz-display-working.jpg|Image 2]]<br /> <br /> Image 2. Working prototype (missing battery holder).</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=IoTuz_Dev_Environment&diff=704 2017-01-16T08:56:41Z

<p>Stuart Young: </p> <hr /> <div>The instructions for installing the IoTuz Dev Environment are now on Github at: https://github.com/CCHS-Melbourne/IoTuz/wiki/Software-Instructions<br /> <br /> Note: These instructions were changed just before the [[OHC2017]] so if you haven't updated your install, please check them again.</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017&diff=701 2017-01-12T05:19:15Z

<p>Stuart Young: /* Venue */</p> <hr /> <div>'''[https://goo.gl/forms/tGUfEifPP1OZ37082 Registrations now CLOSED for the Open Hardware Miniconf 2017]'''<br /> <br /> '''To improve diversity and better representation, we have allocated 3 additional OHMC places for women attending LCA2017 (none left).'''<br /> <br /> The Open Hardware Miniconf 2017 will take place as part of [https://linux.conf.au/ LCA 2017] in Hobart, Tasmania, Australia.<br /> <br /> The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and &quot;maker culture&quot;. One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.<br /> <br /> Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.<br /> <br /> The day will run in two distinct halves. The first part of the day will be a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day will be presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day. Due to the nature of the hardware project, we will be spending more time on presentations about the IoTuz hardware, software and getting the most out of it.<br /> <br /> == Venue ==<br /> <br /> We are pleased to announce that we'll be running OHMC2017 in '''[http://www.wrestpoint.com.au/conference/wellington-room-,facilities_viewItem_41-en.html Welliington room #2]''' at Wrestpoint.<br /> <br /> == Schedule ==<br /> <br /> Date: Tuesday 17th January 2017<br /> <br /> Project assembly in the morning followed by talks in the afternoon:<br /> <br /> * 10:40 - 10:50 '''Welcome &amp; Introduction'''<br /> * 10:50 - 12:20 '''IoTuz Assembly Workshop''' (registration required to participate, spectators also welcome)<br /> * 12:20 - 1:20 Lunch<br /> * 1:20 - 3:00 '''IoTuz Talks'''<br /> ** ESP32 microcontroller - hardware, software, possibilities (Angus Gratton)<br /> ** IoTuz hardware - design, manufacturing, working with KiCad (Bob Powers)<br /> ** IoTuz software architecture, using esp-idf with Arduino (Mark Wolfe) <br /> * 3:00 - 3:40 Afternoon Tea<br /> * 3:40 - 5:20 '''Talks and finishing off with lightning talks'''<br /> ** Micropython (Nick Moore)<br /> ** IoTuz with MQTT, LCD screen, touchscreen (Andy Gelme)<br /> ** Hackerspace Highlights<br /> ** Lightning Talks<br /> ** Wrap Up<br /> <br /> <br /> === Lightning Talks ===<br /> <br /> * If you'd like to present a 5 minute lightning talk, please email [mailto:andyg@geekscape.org andyg@geekscape.org]<br /> <br /> == Call For Papers ==<br /> <br /> '''Call For Papers is now closed.'''<br /> <br /> == Accepted Papers ==<br /> <br /> '''To be announced.'''<br /> <br /> == Discussion Group ==<br /> <br /> There is a Google Group email list for discussion of topics related to the miniconf, including the assembly session:<br /> <br /> https://groups.google.com/forum/#!forum/open-hardware-conf<br /> <br /> == Assembly Project ==<br /> <br /> Each year we help attendees build a project specially developed for the Open Hardware Miniconf.<br /> <br /> The project this year is called '''IoTuz -The Internet of Tux'''<br /> <br /> The board is based around the '''ESP32''', which is the big brother successor to the '''ESP8266''' used in the ESPlant project in 2016. [http://hackaday.com/2016/09/15/esp32-hands-on-awesome-promise Hack-A-Day article describing the ESP32].<br /> <br /> Estimated cost of the kit is '''AU$120'''.<br /> <br /> Through hole parts on the board will be assembled on the day, with all the SMD parts being pre-loaded on the board.<br /> <br /> Repository for the project is on Github: https://github.com/CCHS-Melbourne/IoTuz<br /> <br /> The hardware kit includes ...<br /> * ESP-WROOM-32 module<br /> * 320 x 240 colour touchscreen<br /> * Joystick, rotary encoder (knob), buttons<br /> * 2x APA106 RGB LEDs (10 mm)<br /> * 3 axis accelerometer<br /> * Barometric pressure sensor<br /> * InfraRed transmitter / receiver<br /> * Audio circuit and speaker<br /> * LiPo battery and charge circuit<br /> * Easy access to IO pins .. alligator clip friendly<br /> <br /> '''Project (im)maturity'''<br /> <br /> Regardless of your current level of experience and skill ... you will have an excellent day and walk away with working hardware and software. If you want to get in at the ground floor of the ESP32 developer community, then this is a great place to start. There will be some uncharted territory, some trail blazing and plenty of learning from our mistakes :)<br /> <br /> The hardware was initially tested by a short run of 4 prototype PCBs. Problems found were corrected for the production run. All the basics should work ... however, there is a chance that some modest hacking might be required, e.g cutting a track and adding wires.<br /> <br /> The ESP32 is very new and modules have only been available in very small quantities to select groups of people for a couple of months. EspressIf have been working (transparently via GitHub) on the RTOS, networking stack and peripheral drivers ... and the basics work, but there is much more work to do.<br /> <br /> '''Software'''<br /> <br /> We've bundled together all the details for developing software at:<br /> * [http://www.openhardwareconf.org/wiki/IoTuz_Dev_Environment IoTuz Development Environment]<br /> <br /> [[File:IoTuz.png|Image 1]]<br /> <br /> Image 1. Rendered version of the board.<br /> <br /> <br /> <br /> [[File:IoTuz-display-working.jpg|Image 2]]<br /> <br /> Image 2. Working prototype (missing battery holder).</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017&diff=700 2017-01-11T13:30:15Z

<p>Stuart Young: /* Assembly Project */</p> <hr /> <div>'''[https://goo.gl/forms/tGUfEifPP1OZ37082 Registrations now CLOSED for the Open Hardware Miniconf 2017]'''<br /> <br /> '''To improve diversity and better representation, we have allocated 3 additional OHMC places for women attending LCA2017 (none left).'''<br /> <br /> The Open Hardware Miniconf 2017 will take place as part of [https://linux.conf.au/ LCA 2017] in Hobart, Tasmania, Australia.<br /> <br /> The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and &quot;maker culture&quot;. One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.<br /> <br /> Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.<br /> <br /> The day will run in two distinct halves. The first part of the day will be a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day will be presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day. Due to the nature of the hardware project, we will be spending more time on presentations about the IoTuz hardware, software and getting the most out of it.<br /> <br /> == Venue ==<br /> <br /> We are pleased to announce that we'll be running OHMC2017 in the [http://www.wrestpoint.com.au/conference/wellington-room-,facilities_viewItem_41-en.html Welliington room] at Wrestpoint.<br /> <br /> == Schedule ==<br /> <br /> Date: Tuesday 17th January 2017<br /> <br /> Project assembly in the morning followed by talks in the afternoon:<br /> <br /> * 10:40 - 10:50 '''Welcome &amp; Introduction'''<br /> * 10:50 - 12:20 '''IoTuz Assembly Workshop''' (registration required to participate, spectators also welcome)<br /> * 12:20 - 1:20 Lunch<br /> * 1:20 - 3:00 '''IoTuz Talks'''<br /> ** ESP32 microcontroller - hardware, software, possibilities (Angus Gratton)<br /> ** IoTuz hardware - design, manufacturing, working with KiCad (Bob Powers)<br /> ** IoTuz software architecture, using esp-idf with Arduino (Mark Wolfe) <br /> * 3:00 - 3:40 Afternoon Tea<br /> * 3:40 - 5:20 '''Talks and finishing off with lightning talks'''<br /> ** Micropython (Nick Moore)<br /> ** IoTuz with MQTT, LCD screen, touchscreen (Andy Gelme)<br /> ** Hackerspace Highlights<br /> ** Lightning Talks<br /> ** Wrap Up<br /> <br /> <br /> === Lightning Talks ===<br /> <br /> * If you'd like to present a 5 minute lightning talk, please email [mailto:andyg@geekscape.org andyg@geekscape.org]<br /> <br /> == Call For Papers ==<br /> <br /> '''Call For Papers is now closed.'''<br /> <br /> == Accepted Papers ==<br /> <br /> '''To be announced.'''<br /> <br /> == Discussion Group ==<br /> <br /> There is a Google Group email list for discussion of topics related to the miniconf, including the assembly session:<br /> <br /> https://groups.google.com/forum/#!forum/open-hardware-conf<br /> <br /> == Assembly Project ==<br /> <br /> Each year we help attendees build a project specially developed for the Open Hardware Miniconf.<br /> <br /> The project this year is called '''IoTuz -The Internet of Tux'''<br /> <br /> The board is based around the '''ESP32''', which is the big brother successor to the '''ESP8266''' used in the ESPlant project in 2016. [http://hackaday.com/2016/09/15/esp32-hands-on-awesome-promise Hack-A-Day article describing the ESP32].<br /> <br /> Estimated cost of the kit is '''AU$120'''.<br /> <br /> Through hole parts on the board will be assembled on the day, with all the SMD parts being pre-loaded on the board.<br /> <br /> Repository for the project is on Github: https://github.com/CCHS-Melbourne/IoTuz<br /> <br /> The hardware kit includes ...<br /> * ESP-WROOM-32 module<br /> * 320 x 240 colour touchscreen<br /> * Joystick, rotary encoder (knob), buttons<br /> * 2x APA106 RGB LEDs (10 mm)<br /> * 3 axis accelerometer<br /> * Barometric pressure sensor<br /> * InfraRed transmitter / receiver<br /> * Audio circuit and speaker<br /> * LiPo battery and charge circuit<br /> * Easy access to IO pins .. alligator clip friendly<br /> <br /> '''Project (im)maturity'''<br /> <br /> Regardless of your current level of experience and skill ... you will have an excellent day and walk away with working hardware and software. If you want to get in at the ground floor of the ESP32 developer community, then this is a great place to start. There will be some uncharted territory, some trail blazing and plenty of learning from our mistakes :)<br /> <br /> The hardware was initially tested by a short run of 4 prototype PCBs. Problems found were corrected for the production run. All the basics should work ... however, there is a chance that some modest hacking might be required, e.g cutting a track and adding wires.<br /> <br /> The ESP32 is very new and modules have only been available in very small quantities to select groups of people for a couple of months. EspressIf have been working (transparently via GitHub) on the RTOS, networking stack and peripheral drivers ... and the basics work, but there is much more work to do.<br /> <br /> '''Software'''<br /> <br /> We've bundled together all the details for developing software at:<br /> * [http://www.openhardwareconf.org/wiki/IoTuz_Dev_Environment IoTuz Development Environment]<br /> <br /> [[File:IoTuz.png|Image 1]]<br /> <br /> Image 1. Rendered version of the board.<br /> <br /> <br /> <br /> [[File:IoTuz-display-working.jpg|Image 2]]<br /> <br /> Image 2. Working prototype (missing battery holder).</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=IoTuz_Dev_Environment&diff=699 2017-01-11T04:57:02Z

<p>Stuart Young: </p> <hr /> <div>The IoTuz uses the ESP32 at its core, and hence the dev environment for the IoTuz is the standard ESP-IDF dev environment/framework. The dev framework is a complete cross-compiling environment which includes the necessary pieces to not only develop software for the ESP32, but to push it to the device as well.<br /> <br /> =Installing the Dev Framework=<br /> <br /> Instructions for installing the '''ESP-IDF''' dev framework are at https://github.com/espressif/esp-idf#setting-up-esp-idf<br /> <br /> Before the '''Open Hardware MiniConf''', it's recommended that you complete steps '''''1-3''''' of the specific setup guides for your OS.<br /> <br /> =USB Serial Drivers=<br /> <br /> The on-board USB Serial chip for the IoTuz is the CP2102, and you'll need support for this to communicate with the board. You can download drivers from http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx if required.<br /> <br /> If you have a Linux 3.x or later kernel, these drivers are usually supplied by default with the OS Distro. If you roll your own kernel or are using a really stripped down system, you may need to build them from source.<br /> <br /> =ESP32 Developer Docs &amp; Resources=<br /> <br /> Documentation on the ESP32 for developers is at http://esp-idf.readthedocs.io/en/latest/index.html<br /> <br /> The docs cover everything from installing dev environments (covered above), general architecture information, a developer API reference and a technical reference for the ESP32 itself.<br /> <br /> The [http://esp32.com/ Espressif forum/website] is also a very useful resource.<br /> <br /> =IoTuz Specific Code=<br /> <br /> As part of the main [https://github.com/CCHS-Melbourne/IoTuz IoTuz repo], there is some [https://github.com/CCHS-Melbourne/IoTuz/tree/master/Software/Snippets Test code] for confirming that hardware on the IoTuz is working as expected. <br /> <br /> =ESP32 Enabled Arduino IDE=<br /> <br /> There are install instructions for getting the ESP32 running in the Arduino IDE at https://github.com/espressif/arduino-esp32#installation-instructions<br /> <br /> The [[OHC2017|Open Hardware Miniconf 2017]] won't be using the ESP32 Arduino environment, however it's still quite usable, especially for basic stuff and testing. Most functions in the ESP-IDF are exposed and available in ESP Arduino shortly after they appear in ESP-IDF.</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=IoTuz_Dev_Environment&diff=698 2017-01-11T03:11:06Z

<p>Stuart Young: /* ESP32 Developer Docs &amp; Reosurces */</p> <hr /> <div>The IoTuz uses the ESP32 at its core, and hence the dev environment for the IoTuz is the standard ESP-IDF dev environment/framework. The dev framework is a complete cross-compiling environment which includes the necessary pieces to not only develop software for the ESP32, but to push it to the device as well.<br /> <br /> =Installing the Dev Framework=<br /> <br /> Instructions for installing the '''ESP-IDF''' dev framework are at https://github.com/espressif/esp-idf#setting-up-esp-idf<br /> <br /> Before the '''Open Hardware MiniConf''', it's recommended that you complete steps '''''1-3''''' of the specific setup guides for your OS.<br /> <br /> =USB Serial Drivers=<br /> <br /> The on-board USB Serial chip for the IoTuz is the CP2102, and you'll need support for this to communicate with the board. You can download drivers from http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx if required.<br /> <br /> If you have a Linux 3.x or later kernel, these drivers are usually supplied by default with the OS Distro. If you roll your own kernel or are using a really stripped down system, you may need to build them from source.<br /> <br /> =ESP32 Developer Docs &amp; Resources=<br /> <br /> Documentation on the ESP32 for developers is at http://esp-idf.readthedocs.io/en/latest/index.html<br /> <br /> The docs cover everything from installing dev environments (covered above), general architecture information, a developer API reference and a technical reference for the ESP32 itself.<br /> <br /> The [http://esp32.com/ Espressif forum/website] is also a very useful resource.<br /> <br /> =ESP32 Enabled Arduino IDE=<br /> <br /> There are install instructions for getting the ESP32 running in the Arduino IDE at https://github.com/espressif/arduino-esp32#installation-instructions<br /> <br /> The [[OHC2017|Open Hardware Miniconf 2017]] won't be using the ESP32 Arduino environment, however it's still quite usable, especially for basic stuff and testing. Most functions in the ESP-IDF are exposed and available in ESP Arduino shortly after they appear in ESP-IDF.</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=IoTuz_Dev_Environment&diff=697 2017-01-11T03:10:53Z

<p>Stuart Young: /* ESP32 Developer Docs */</p> <hr /> <div>The IoTuz uses the ESP32 at its core, and hence the dev environment for the IoTuz is the standard ESP-IDF dev environment/framework. The dev framework is a complete cross-compiling environment which includes the necessary pieces to not only develop software for the ESP32, but to push it to the device as well.<br /> <br /> =Installing the Dev Framework=<br /> <br /> Instructions for installing the '''ESP-IDF''' dev framework are at https://github.com/espressif/esp-idf#setting-up-esp-idf<br /> <br /> Before the '''Open Hardware MiniConf''', it's recommended that you complete steps '''''1-3''''' of the specific setup guides for your OS.<br /> <br /> =USB Serial Drivers=<br /> <br /> The on-board USB Serial chip for the IoTuz is the CP2102, and you'll need support for this to communicate with the board. You can download drivers from http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx if required.<br /> <br /> If you have a Linux 3.x or later kernel, these drivers are usually supplied by default with the OS Distro. If you roll your own kernel or are using a really stripped down system, you may need to build them from source.<br /> <br /> =ESP32 Developer Docs &amp; Reosurces=<br /> <br /> Documentation on the ESP32 for developers is at http://esp-idf.readthedocs.io/en/latest/index.html<br /> <br /> The docs cover everything from installing dev environments (covered above), general architecture information, a developer API reference and a technical reference for the ESP32 itself.<br /> <br /> The [http://esp32.com/ Espressif forum/website] is also a very useful resource.<br /> <br /> =ESP32 Enabled Arduino IDE=<br /> <br /> There are install instructions for getting the ESP32 running in the Arduino IDE at https://github.com/espressif/arduino-esp32#installation-instructions<br /> <br /> The [[OHC2017|Open Hardware Miniconf 2017]] won't be using the ESP32 Arduino environment, however it's still quite usable, especially for basic stuff and testing. Most functions in the ESP-IDF are exposed and available in ESP Arduino shortly after they appear in ESP-IDF.</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=IoTuz_Dev_Environment&diff=696 2017-01-11T03:10:05Z

<p>Stuart Young: </p> <hr /> <div>The IoTuz uses the ESP32 at its core, and hence the dev environment for the IoTuz is the standard ESP-IDF dev environment/framework. The dev framework is a complete cross-compiling environment which includes the necessary pieces to not only develop software for the ESP32, but to push it to the device as well.<br /> <br /> =Installing the Dev Framework=<br /> <br /> Instructions for installing the '''ESP-IDF''' dev framework are at https://github.com/espressif/esp-idf#setting-up-esp-idf<br /> <br /> Before the '''Open Hardware MiniConf''', it's recommended that you complete steps '''''1-3''''' of the specific setup guides for your OS.<br /> <br /> =USB Serial Drivers=<br /> <br /> The on-board USB Serial chip for the IoTuz is the CP2102, and you'll need support for this to communicate with the board. You can download drivers from http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx if required.<br /> <br /> If you have a Linux 3.x or later kernel, these drivers are usually supplied by default with the OS Distro. If you roll your own kernel or are using a really stripped down system, you may need to build them from source.<br /> <br /> =ESP32 Developer Docs=<br /> <br /> Documentation on the ESP32 for developers is at http://esp-idf.readthedocs.io/en/latest/index.html<br /> <br /> The docs cover everything from installing dev environments (covered above), general architecture information, a developer API reference and a technical reference for the ESP32 itself.<br /> <br /> The [http://esp32.com/ Espressif forum/website] is also a very useful resource.<br /> <br /> =ESP32 Enabled Arduino IDE=<br /> <br /> There are install instructions for getting the ESP32 running in the Arduino IDE at https://github.com/espressif/arduino-esp32#installation-instructions<br /> <br /> The [[OHC2017|Open Hardware Miniconf 2017]] won't be using the ESP32 Arduino environment, however it's still quite usable, especially for basic stuff and testing. Most functions in the ESP-IDF are exposed and available in ESP Arduino shortly after they appear in ESP-IDF.</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=IoTuz_Dev_Environment&diff=695 2017-01-10T04:24:46Z

<p>Stuart Young: </p> <hr /> <div>The IoTuz uses the ESP32 at its core, and hence the dev environment for the IoTuz is the standard ESP-IDF dev environment/framework. The dev framework is a complete cross-compiling environment which includes the necessary pieces to not only develop software for the ESP32, but to push it to the device as well.<br /> <br /> =Installing the Dev Framework=<br /> <br /> Instructions for installing the '''ESP-IDF''' dev framework are at https://github.com/espressif/esp-idf#setting-up-esp-idf<br /> <br /> Before the '''Open Hardware MiniConf''', it's recommended that you complete steps '''''1-3''''' of the specific setup guides for your OS.<br /> <br /> =USB Serial Drivers=<br /> <br /> The on-board USB Serial chip for the IoTuz is the CP2102, and you'll need support for this to communicate with the board. You can download drivers from http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx if required.<br /> <br /> If you have a Linux 3.x or later kernel, these drivers are usually supplied by default with the OS Distro. If you roll your own kernel or are using a really stripped down system, you may need to build them from source.<br /> <br /> =ESP32 Developer Docs=<br /> <br /> Documentation on the ESP32 for developers is at http://esp-idf.readthedocs.io/en/latest/index.html<br /> <br /> The docs cover everything from installing dev environments (covered above), general architecture information, a developer API reference and a technical reference for the ESP32 itself.<br /> <br /> =ESP32 Enabled Arduino IDE=<br /> <br /> There are install instructions for getting the ESP32 running in the Arduino IDE at https://github.com/espressif/arduino-esp32#installation-instructions<br /> <br /> The [[OHC2017|Open Hardware Miniconf 2017]] won't be using the ESP32 Arduino environment, however it's still quite usable, especially for basic stuff and testing. Most functions in the ESP-IDF are exposed and available in ESP Arduino shortly after they appear in ESP-IDF.</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=IoTuz_Dev_Environment&diff=694 2017-01-10T02:40:54Z

<p>Stuart Young: </p> <hr /> <div>The IoTuz uses the ESP32 at its core, and hence the dev environment for the IoTuz is the standard ESP-IDF dev environment/framework. The dev framework is a complete cross-compiling environment which includes the necessary pieces to not only develop software for the ESP32, but to push it to the device as well.<br /> <br /> =Installing the Dev Framework=<br /> <br /> Instructions for installing the '''ESP-IDF''' dev framework are at https://github.com/espressif/esp-idf#setting-up-esp-idf<br /> <br /> Before the '''Open Hardware MiniConf''', it's recommended that you complete steps '''''1-3''''' of the specific setup guides for your OS.<br /> <br /> =USB Serial Drivers=<br /> <br /> The on-board USB Serial chip for the IoTuz is the CP2102, and you'll need support for this to communicate with the board. You can download drivers from http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx if required.<br /> <br /> If you have a Linux 3.x or later kernel, these drivers are usually supplied by default with the OS Distro. If you roll your own kernel or are using a really stripped down system, you may need to build them from source.<br /> <br /> =ESP32 Developer Docs=<br /> <br /> Documentation on the ESP32 for developers is at http://esp-idf.readthedocs.io/en/latest/index.html<br /> <br /> The docs cover everything from installing dev environments (covered above), general architecture information, a developer API reference and a technical reference for the ESP32 itself.<br /> <br /> =ESP32 Enabled Arduino IDE=<br /> <br /> There are install instructions for getting the ESP32 running in the Arduino IDE at https://github.com/espressif/arduino-esp32#installation-instructions<br /> <br /> The [[OHC2017|Open Hardware Miniconf 2017]] won't be using the ESP32 Arduino environment, however it's still quite usable, especially for basic stuff and testing.</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017&diff=691 2017-01-09T10:02:12Z

<p>Stuart Young: /* Assembly Project */</p> <hr /> <div>'''[https://goo.gl/forms/tGUfEifPP1OZ37082 Registrations now WAIT-LISTED for the Open Hardware Miniconf 2017]'''<br /> <br /> '''To improve diversity and better representation, we have allocated 3 additional OHMC places for women attending LCA2017 (none left).'''<br /> <br /> The Open Hardware Miniconf 2017 will take place as part of [https://linux.conf.au/ LCA 2017] in Hobart, Tasmania, Australia.<br /> <br /> The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and &quot;maker culture&quot;. One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.<br /> <br /> Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.<br /> <br /> The day will run in two distinct halves. The first part of the day will be a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day will be presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day. Due to the nature of the hardware project, we will be spending more time on presentations about the IoTuz hardware, software and getting the most out of it.<br /> <br /> == Venue ==<br /> <br /> We are pleased to announce that we'll be running OHMC2017 in the [http://www.wrestpoint.com.au/conference/wellington-room-,facilities_viewItem_41-en.html Welliington room] at Wrestpoint.<br /> <br /> == Schedule ==<br /> <br /> Date: Tuesday 17th January 2017<br /> <br /> Project assembly in the morning followed by talks in the afternoon:<br /> <br /> * 10:40 - 10:50 '''Welcome &amp; Introduction'''<br /> * 10:50 - 12:20 '''IoTuz Assembly Workshop''' (registration required to participate, spectators also welcome)<br /> * 12:20 - 1:20 Lunch<br /> * 1:20 - 3:00 '''IoTuz Talks'''<br /> ** ESP32 microcontroller - hardware, software, possibilities (Angus Gratton)<br /> ** IoTuz hardware - design, manufacturing, working with KiCad (Bob Powers)<br /> ** IoTuz software architecture, using esp-idf with Arduino (Mark Wolfe) <br /> * 3:00 - 3:40 Afternoon Tea<br /> * 3:40 - 5:20 '''Talks and finishing off with lightning talks'''<br /> ** Micropython (Nick Moore)<br /> ** IoTuz with MQTT, LCD screen, touchscreen (Andy Gelme)<br /> ** Hackerspace Highlights<br /> ** Lightning Talks<br /> ** Wrap Up<br /> <br /> <br /> === Lightning Talks ===<br /> <br /> * If you'd like to present a 5 minute lightning talk, please email [mailto:andyg@geekscape.org andyg@geekscape.org]<br /> <br /> == Call For Papers ==<br /> <br /> '''Call For Papers is now closed.'''<br /> <br /> == Accepted Papers ==<br /> <br /> '''To be announced.'''<br /> <br /> == Discussion Group ==<br /> <br /> There is a Google Group email list for discussion of topics related to the miniconf, including the assembly session:<br /> <br /> https://groups.google.com/forum/#!forum/open-hardware-conf<br /> <br /> == Assembly Project ==<br /> <br /> Each year we help attendees build a project specially developed for the Open Hardware Miniconf.<br /> <br /> The project this year is called '''IoTuz -The Internet of Tux'''<br /> <br /> The board is based around the '''ESP32''', which is the big brother successor to the '''ESP8266''' used in the ESPlant project in 2016. [http://hackaday.com/2016/09/15/esp32-hands-on-awesome-promise Hack-A-Day article describing the ESP32].<br /> <br /> Estimated cost of the kit is '''AU$120'''.<br /> <br /> Through hole parts on the board will be assembled on the day, with all the SMD parts being pre-loaded on the board.<br /> <br /> Repository for the project is on Github: https://github.com/CCHS-Melbourne/IoTuz<br /> <br /> The hardware kit includes ...<br /> * ESP-WROOM-32 module<br /> * 320 x 240 colour touchscreen<br /> * Joystick, rotary encoder (knob), buttons<br /> * 2x APA106 RGB LEDs (10 mm)<br /> * 3 axis accelerometer<br /> * Barometric pressure sensor<br /> * InfraRed transmitter / receiver<br /> * Audio circuit and speaker<br /> * LiPo battery and charge circuit<br /> * Easy access to IO pins .. alligator clip friendly<br /> <br /> '''Project (im)maturity'''<br /> <br /> Regardless of your current level of experience and skill ... you will have an excellent day and walk away with working hardware and software. If you want to get in at the ground floor of the ESP32 developer community, then this is a great place to start. There will be some uncharted territory, some trail blazing and plenty of learning from our mistakes :)<br /> <br /> The hardware was initially tested by a short run of 4 prototype PCBs. Problems found were corrected for the production run. All the basics should work ... however, there is a chance that some modest hacking might be required, e.g cutting a track and adding wires.<br /> <br /> The ESP32 is very new and modules have only been available in very small quantities to select groups of people for a couple of months. EspressIf have been working (transparently via GitHub) on the RTOS, networking stack and peripheral drivers ... and the basics work, but there is much more work to do.<br /> <br /> We've bundled together all the details for developing software at:<br /> * [http://www.openhardwareconf.org/wiki/IoTuz_Dev_Environment IoTuz Development Environment]<br /> <br /> [[File:IoTuz.png|Image 1]]<br /> <br /> Image 1. Rendered version of the board.<br /> <br /> <br /> <br /> [[File:IoTuz-display-working.jpg|Image 2]]<br /> <br /> Image 2. Working prototype (missing battery holder).</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=IoTuz_Dev_Environment&diff=690 2017-01-09T09:59:41Z

<p>Stuart Young: </p> <hr /> <div>The IoTuz uses the ESP32 at its core, and hence the dev environment for the IoTuz is the standard ESP-IDF dev environment/framework. The dev framework is a complete cross-compiling environment which includes the necessary pieces to not only develop software for the ESP32, but to push it to the device as well.<br /> <br /> =Installing the Dev Framework=<br /> <br /> Instructions for installing the '''ESP-IDF''' dev framework are at https://github.com/espressif/esp-idf#setting-up-esp-idf<br /> <br /> Before the '''Open Hardware MiniConf''', it's recommended that you complete steps '''''1-3''''' of the specific setup guides for your OS.<br /> <br /> =USB Serial Drivers=<br /> <br /> The on-board USB Serial chip for the IoTuz is the CP2102, and you'll need support for this to communicate with the board. You can download drivers from http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx if required.<br /> <br /> If you have a Linux 3.x or later kernel, these drivers are usually supplied by default with the OS Distro. If you roll your own kernel or are using a really stripped down system, you may need to build them from source.<br /> <br /> =ESP32 Developer Docs=<br /> <br /> Documentation on the ESP32 for developers is at http://esp-idf.readthedocs.io/en/latest/index.html<br /> <br /> The docs cover everything from installing dev environments (covered above), general architecture information, a developer API reference and a technical reference for the ESP32 itself.</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=IoTuz_Dev_Environment&diff=689 2017-01-09T09:52:34Z

<p>Stuart Young: </p> <hr /> <div>The IoTuz uses the ESP32 at its core, and hence the dev environment for the IoTuz is the standard ESP-IDF dev environment/framework. The dev framework is a complete cross-compiling environment which includes the necessary pieces to not only develop software for the ESP32, but to push it to the device as well.<br /> <br /> =Installing the Dev Framework=<br /> <br /> Instructions for installing the '''ESP-IDF''' dev framework are at https://github.com/espressif/esp-idf#setting-up-esp-idf<br /> <br /> Before the '''Open Hardware MiniConf''', it's recommended that you complete steps '''''1-3''''' of the specific setup guides for your OS.<br /> <br /> =USB Serial Drivers=<br /> <br /> The on-board USB Serial chip for the IoTuz is the CP2102, and you'll need support for this to communicate with the board. You can download drivers from http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx if required.<br /> <br /> If you have a Linux 3.x or later kernel, these drivers are usually supplied by default with the OS Distro. If you roll your own kernel or are using a really stripped down system, you may need to build them from source.</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=IoTuz_Dev_Environment&diff=688 2017-01-09T09:51:07Z

<p>Stuart Young: </p> <hr /> <div>The IoTuz uses the ESP32 at its core, and hence the dev environment for the IoTuz is the standard ESP_IDF dev environment/framework.<br /> <br /> =Installing the Dev Framework=<br /> <br /> Instructions for installing the '''ESP-IDF''' dev framework are at https://github.com/espressif/esp-idf#setting-up-esp-idf<br /> <br /> Before the '''Open Hardware MiniConf''', it's recommended that you complete steps '''''1-3''''' of the specific setup guides for your OS.<br /> <br /> =USB Serial Drivers=<br /> <br /> The on-board USB Serial chip for the IoTuz is the CP2102, and you'll need support for this to communicate with the board. You can download drivers from http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx if required.<br /> <br /> If you have a Linux 3.x or later kernel, these drivers are usually supplied by default with the OS Distro. If you roll your own kernel or are using a really stripped down system, you may need to build them from source.</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=IoTuz_Dev_Environment&diff=687 2017-01-09T09:50:49Z

<p>Stuart Young: </p> <hr /> <div>The IoTuz uses the ESP32 at its core, and hence the dev environment for the IoTuz is the standard ESP_IDF dev environment/framework.<br /> <br /> =Installing the Dev Framework=<br /> <br /> Instructions for installing the ESP-IDF dev framework are at https://github.com/espressif/esp-idf#setting-up-esp-idf<br /> <br /> Before the '''Open Hardware MiniConf''', it's recommended that you complete steps '''''1-3''''' of the specific setup guides for your OS.<br /> <br /> =USB Serial Drivers=<br /> <br /> The on-board USB Serial chip for the IoTuz is the CP2102, and you'll need support for this to communicate with the board. You can download drivers from http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx if required.<br /> <br /> If you have a Linux 3.x or later kernel, these drivers are usually supplied by default with the OS Distro. If you roll your own kernel or are using a really stripped down system, you may need to build them from source.</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=IoTuz_Dev_Environment&diff=686 2017-01-09T09:50:32Z

<p>Stuart Young: </p> <hr /> <div>The IoTuz uses the ESP32 at its core, and hence the dev environment for the IoTuz is the standard ESP_IDF dev environment/framework.<br /> <br /> =Installing the Dev Framework=<br /> <br /> Instructions for installing the ESP-IDF dev framework are at https://github.com/espressif/esp-idf#setting-up-esp-idf<br /> <br /> Before the '''Open Hardware MiniConf''', it's recommended that you complete steps ''1-3'' of the specific setup guides for your OS.<br /> <br /> =USB Serial Drivers=<br /> <br /> The on-board USB Serial chip for the IoTuz is the CP2102, and you'll need support for this to communicate with the board. You can download drivers from http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx if required.<br /> <br /> If you have a Linux 3.x or later kernel, these drivers are usually supplied by default with the OS Distro. If you roll your own kernel or are using a really stripped down system, you may need to build them from source.</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=IoTuz_Dev_Environment&diff=685 2017-01-09T09:48:55Z

<p>Stuart Young: </p> <hr /> <div>The IoTuz uses the ESP32 at its core, and hence the dev environment for the IoTuz is the standard ESP_IDF dev environment/framework.<br /> <br /> Instructions for installing the ESP-IDF dev framework are at https://github.com/espressif/esp-idf#setting-up-esp-idf<br /> <br /> Before the conference, it's recommended that you complete steps 1-3 of the specific setup guides for your OS.<br /> <br /> The on-board USB Serial chip for the IoTuz is the CP2102, and you'll need support for this to communicate with the board. You can download drivers from http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx<br /> <br /> If you have a Linux 3.x or later kernel, these drivers are usually supplied by default with the OS Distro. If you roll your own kernel or are using a really stripped down system, you may need to build them from source.</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=IoTuz_Dev_Environment&diff=684 2017-01-09T09:35:15Z

<p>Stuart Young: Created page with &quot;The IoTuz uses the ESP32 at its core, and hence the dev environment for the IoTuz is the standard ESP_IDF dev environment/framework. Instructions for installing the ESP-IDF d...&quot;</p> <hr /> <div>The IoTuz uses the ESP32 at its core, and hence the dev environment for the IoTuz is the standard ESP_IDF dev environment/framework.<br /> <br /> Instructions for installing the ESP-IDF dev framework are at https://github.com/espressif/esp-idf#setting-up-esp-idf<br /> <br /> The on-board USB Serial chip for the IoTuz is the CP2102, and you'll need support for this to communicate with the board. You can download drivers from http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx<br /> <br /> If you have a Linux 3.x or later kernel, these drivers are usually supplied by default with the OS Distro. If you roll your own kernel or are using a really stripped down system, you may need to build them from source.</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017-CFP&diff=683 2017-01-04T21:19:11Z

<p>Stuart Young: /* OHC 2017 Call For Presentations */</p> <hr /> <div>== OHC 2017 Call For Presentations ==<br /> <br /> '''Call for papers is now closed. Deadline for submissions was midnight 31st December 2016.'''<br /> <br /> === Presentation Types ===<br /> The Open Hardware Miniconf will follow a similar format to the Arduino Miniconf which has run in previous years, with a hardware assembly project in the morning (for registered attendees) and a variety of presentations in the afternoon that can be attended by any [http://linux.conf.au LCA2017] delegates. Time in the afternoon has been structured to allow for both full presentations and lightning talks:<br /> <br /> Full presentations are '''20 minutes'''.&lt;br /&gt;<br /> Lightning talks are '''5 minutes'''.<br /> <br /> This is a friendly environment in which to make an informal low-stress presentation, so it’s a great opportunity if you haven’t done conference presentations before.<br /> <br /> === Topics ===<br /> Your talk can cover just about anything related to Open Hardware, such as:<br /> <br /> * A show-and-tell for one of your projects<br /> * Design techniques<br /> * Basic electronics for software developers<br /> * Interfacing with hardware, e.g sensors, actuators, displays, motors, geiger counters<br /> * Driver or library development for embedded systems<br /> * Development environments, software, and tools<br /> * Working within microcontroller limitations<br /> * Internet of Things, wearable computing, vehicle telemetry<br /> * Licensing for hardware<br /> * The business aspects of Open Hardware<br /> <br /> The audience will consist primarily of software developers, since this event takes place as an adjunct to [http://linux.conf.au linux.conf.au]. What the Open Hardware Miniconf does is give the hard-core devs who typically attend linux.conf.au an opportunity to experience the joy of hardware hacking (http://jon.oxer.com.au/blog/id/358).<br /> <br /> === Submitting a Proposal ===<br /> So if you are attending [http://linux.conf.au LCA2017] (Hobart) in January and would like to present, please email [mailto:andyg@geekscape.org?subject=OHC2017-cfp andyg@geekscape.org] with:<br /> <br /> * Your name<br /> * Brief biography (noting any previous speaking experience)<br /> * Talk title<br /> * Brief outline of your proposed talk<br /> * Notes of any special equipment / facilities you may require<br /> * Talk type (20 minute presentation or 5 minute lightning talk)<br /> <br /> This only needs to be a few sentences: don't spend days on your proposal, just put it down in a quick email. We can always discuss details later if required.<br /> <br /> === Recording and Licensing ===<br /> <br /> To increase the number of people that can view your presentation, linux.conf.au might record your talk and make it publicly available after the event. When submitting your proposal you will be asked to release materials relating to your presentation under a Creative Commons ShareAlike License. Additionally, if you are discussing specific software or hardware in your presentation, you must ensure that it has an appropriate open licence.<br /> <br /> All presentation material should be suitable for people aged 12 and above. All presentations are subject to Linux Australia's code of conduct, including that they must not contain:<br /> <br /> * Sexual or violent imagery<br /> * Exclusionary language<br /> * Language which is not appropriate for an all-ages audience<br /> <br /> For more information on the LCA presentation policies etc, see: https://linux.conf.au/proposals/</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017&diff=682 2017-01-04T21:18:27Z

<p>Stuart Young: /* Call For Papers */</p> <hr /> <div>'''[https://goo.gl/forms/tGUfEifPP1OZ37082 Registrations now WAIT-LISTED for the Open Hardware Miniconf 2017]'''<br /> <br /> '''To improve diversity and better representation, we have allocated 3 additional OHMC places for women attending LCA2017 (none left).'''<br /> <br /> The Open Hardware Miniconf 2017 will take place as part of [https://linux.conf.au/ LCA 2017] in Hobart, Tasmania, Australia.<br /> <br /> The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and &quot;maker culture&quot;. One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.<br /> <br /> Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.<br /> <br /> The day will run in two distinct halves. The first part of the day will be a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day will be presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day. Due to the nature of the hardware project, we will be spending more time on presentations about the IoTuz hardware, software and getting the most out of it.<br /> <br /> == Venue ==<br /> <br /> We are pleased to announce that we'll be running OHMC2017 in the [http://www.wrestpoint.com.au/conference/wellington-room-,facilities_viewItem_41-en.html Welliington room] at Wrestpoint.<br /> <br /> == Schedule ==<br /> <br /> Date: Tuesday 17th January 2017<br /> <br /> Project assembly in the morning followed by talks in the afternoon:<br /> <br /> * 10:40 - 10:50 '''Welcome &amp; Introduction'''<br /> * 10:50 - 12:20 '''IoTuz Assembly Workshop''' (registration required to participate, spectators also welcome)<br /> * 12:20 - 1:20 Lunch<br /> * 1:20 - 3:00 '''IoTuz Talks'''<br /> ** ESP32 microcontroller - hardware, software, possibilities (Angus Gratton)<br /> ** IoTuz hardware - design, manufacturing, working with KiCad (Bob Powers)<br /> ** IoTuz software architecture, using esp-idf with Arduino (Mark Wolfe) <br /> * 3:00 - 3:40 Afternoon Tea<br /> * 3:40 - 5:20 '''Talks and finishing off with lightning talks'''<br /> ** Micropython (Nick Moore)<br /> ** IoTuz with MQTT, LCD screen, touchscreen (Andy Gelme)<br /> ** Hackerspace Highlights<br /> ** Lightning Talks<br /> ** Wrap Up<br /> <br /> <br /> === Lightning Talks ===<br /> <br /> * If you'd like to present a 5 minute lightning talk, please email [mailto:andyg@geekscape.org andyg@geekscape.org]<br /> <br /> == Call For Papers ==<br /> <br /> '''Call For Papers is now closed.'''<br /> <br /> == Accepted Papers ==<br /> <br /> '''To be announced.'''<br /> <br /> == Discussion Group ==<br /> <br /> There is a Google Group email list for discussion of topics related to the miniconf, including the assembly session:<br /> <br /> https://groups.google.com/forum/#!forum/open-hardware-conf<br /> <br /> == Assembly Project ==<br /> <br /> Each year we help attendees build a project specially developed for the Open Hardware Miniconf.<br /> <br /> The project this year is called '''IoTuz -The Internet of Tux'''<br /> <br /> The board is based around the '''ESP32''', which is the big brother successor to the '''ESP8266''' used in the ESPlant project in 2016. [http://hackaday.com/2016/09/15/esp32-hands-on-awesome-promise Hack-A-Day article describing the ESP32].<br /> <br /> Estimated cost of the kit is '''AU$120'''.<br /> <br /> Through hole parts on the board will be assembled on the day, with all the SMD parts being pre-loaded on the board.<br /> <br /> Repository for the project is on Github: https://github.com/CCHS-Melbourne/IoTuz<br /> <br /> The hardware kit includes ...<br /> * ESP-WROOM-32 module<br /> * 320 x 240 colour touchscreen<br /> * Joystick, rotary encoder (knob), buttons<br /> * 2x APA106 RGB LEDs (10 mm)<br /> * 3 axis accelerometer<br /> * Barometric pressure sensor<br /> * InfraRed transmitter / receiver<br /> * Audio circuit and speaker<br /> * LiPo battery and charge circuit<br /> * Easy access to IO pins .. alligator clip friendly<br /> <br /> '''Project (im)maturity'''<br /> <br /> Regardless of your current level of experience and skill ... you will have an excellent day and walk away with working hardware and software. If you want to get in at the ground floor of the ESP32 developer community, then this is a great place to start. There will be some uncharted territory, some trail blazing and plenty of learning from our mistakes :)<br /> <br /> The hardware was initially tested by a short run of 4 prototype PCBs. Problems found were corrected for the production run. All the basics should work ... however, there is a chance that some modest hacking might be required, e.g cutting a track and adding wires.<br /> <br /> The ESP32 is very new and modules have only been available in very small quantities to select groups of people for a couple of months. EspressIf have been working (transparently via GitHub) on the RTOS, networking stack and peripheral drivers ... and the basics work, but there is much more work to do.<br /> <br /> * [https://github.com/espressif/esp-idf Development Environment (GitHub)]<br /> * [http://esp-idf.readthedocs.io/en/latest/index.html Documentation]<br /> <br /> [[File:IoTuz.png|Image 1]]<br /> <br /> Image 1. Rendered version of the board.<br /> <br /> <br /> <br /> [[File:IoTuz-display-working.jpg|Image 2]]<br /> <br /> Image 2. Working prototype (missing battery holder).</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017&diff=663 2016-12-30T06:12:31Z

<p>Stuart Young: /* Assembly Project */</p> <hr /> <div>'''[https://goo.gl/forms/tGUfEifPP1OZ37082 Registrations now open for the Open Hardware Miniconf 2017]'''<br /> <br /> The Open Hardware Miniconf 2017 will take place as part of [https://linux.conf.au/ LCA 2017] in Hobart, Tasmania, Australia.<br /> <br /> The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and &quot;maker culture&quot;. One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.<br /> <br /> Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.<br /> <br /> The day will run in two distinct halves. The first part of the day will be a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day will be presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day.<br /> <br /> == Venue ==<br /> <br /> We are pleased to announce that we'll be running OHMC2017 in the [http://www.wrestpoint.com.au/conference/wellington-room-,facilities_viewItem_41-en.html Welliington room] at Wrestpoint.<br /> <br /> == Schedule ==<br /> <br /> '''To be announced in detail shortly.'''<br /> <br /> Date: Tuesday 17th January 2017<br /> <br /> * 10:40 - 12:20 '''Assembly workshop''' (registration required to participate, spectators also welcome)<br /> * 12:20 - 1:20 Lunch<br /> * 1:20 - 3:00 '''Assembly workshop continued, Talks'''<br /> * 3:00 - 3:40 Afternoon Tea<br /> * 3:40 - 5:20 '''Talks and finishing off with lightning talks'''<br /> <br /> Usual format for the OpenHardware MiniConf (Construction in the morning followed by talks in the afternoon) is expected.<br /> <br /> === Lightning Talks ===<br /> <br /> * If you'd like to present a 5 minute lightning talk, please email [mailto:andyg@geekscape.org andyg@geekscape.org]<br /> <br /> == Call For Papers ==<br /> <br /> '''Call For Papers is now open.'''<br /> <br /> Please see [[OHC2017-CFP]] for more information<br /> <br /> '''Call For Papers closes at midnight 31st December 2016'''<br /> <br /> == Accepted Papers ==<br /> <br /> '''To be announced.'''<br /> <br /> == Discussion Group ==<br /> <br /> There is a Google Group email list for discussion of topics related to the miniconf, including the assembly session:<br /> <br /> https://groups.google.com/forum/#!forum/open-hardware-conf<br /> <br /> == Assembly Project ==<br /> <br /> Each year we build a project developed for the Miniconf.<br /> <br /> '''The assembly project is still a work in progress.'''<br /> <br /> The project this year is called '''IoTuz -The Internet of Tux'''<br /> <br /> The board is based around the '''ESP32''', which is the big brother successor to the '''ESP8266''' used in the ESPlant project in 2016.<br /> <br /> Estimated cost of the kit is '''AU$120'''.<br /> <br /> Through hole parts on the board will be assembled on the day, with all the SMD parts being pre-loaded on the board.<br /> <br /> Repository for the project is on Github: https://github.com/CCHS-Melbourne/IoTuz<br /> <br /> [[File:IoTuz.png|Image 1]]<br /> <br /> Image 1. Rendered version of the board.<br /> <br /> <br /> <br /> [[File:IoTuz-display-working.jpg|Image 2]]<br /> <br /> Image 2. Working prototype (missing battery holder).</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017&diff=662 2016-12-30T06:12:02Z

<p>Stuart Young: /* Assembly Project */</p> <hr /> <div>'''[https://goo.gl/forms/tGUfEifPP1OZ37082 Registrations now open for the Open Hardware Miniconf 2017]'''<br /> <br /> The Open Hardware Miniconf 2017 will take place as part of [https://linux.conf.au/ LCA 2017] in Hobart, Tasmania, Australia.<br /> <br /> The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and &quot;maker culture&quot;. One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.<br /> <br /> Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.<br /> <br /> The day will run in two distinct halves. The first part of the day will be a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day will be presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day.<br /> <br /> == Venue ==<br /> <br /> We are pleased to announce that we'll be running OHMC2017 in the [http://www.wrestpoint.com.au/conference/wellington-room-,facilities_viewItem_41-en.html Welliington room] at Wrestpoint.<br /> <br /> == Schedule ==<br /> <br /> '''To be announced in detail shortly.'''<br /> <br /> Date: Tuesday 17th January 2017<br /> <br /> * 10:40 - 12:20 '''Assembly workshop''' (registration required to participate, spectators also welcome)<br /> * 12:20 - 1:20 Lunch<br /> * 1:20 - 3:00 '''Assembly workshop continued, Talks'''<br /> * 3:00 - 3:40 Afternoon Tea<br /> * 3:40 - 5:20 '''Talks and finishing off with lightning talks'''<br /> <br /> Usual format for the OpenHardware MiniConf (Construction in the morning followed by talks in the afternoon) is expected.<br /> <br /> === Lightning Talks ===<br /> <br /> * If you'd like to present a 5 minute lightning talk, please email [mailto:andyg@geekscape.org andyg@geekscape.org]<br /> <br /> == Call For Papers ==<br /> <br /> '''Call For Papers is now open.'''<br /> <br /> Please see [[OHC2017-CFP]] for more information<br /> <br /> '''Call For Papers closes at midnight 31st December 2016'''<br /> <br /> == Accepted Papers ==<br /> <br /> '''To be announced.'''<br /> <br /> == Discussion Group ==<br /> <br /> There is a Google Group email list for discussion of topics related to the miniconf, including the assembly session:<br /> <br /> https://groups.google.com/forum/#!forum/open-hardware-conf<br /> <br /> == Assembly Project ==<br /> <br /> Each year we build a project developed for the Miniconf.<br /> <br /> '''The assembly project is still a work in progress.'''<br /> <br /> The project this year is called '''IoTuz -The Internet of Tux'''<br /> <br /> The board is based around the '''ESP32''', which is the big brother successor to the '''ESP8266''' used in the ESPlant project in 2016.<br /> <br /> Estimated cost of the project is '''AU$120'''.<br /> <br /> Through hole parts on the board will be assembled on the day, with all the SMD parts being pre-loaded on the board.<br /> <br /> Repository for the project is on Github: https://github.com/CCHS-Melbourne/IoTuz<br /> <br /> [[File:IoTuz.png|Image 1]]<br /> <br /> Image 1. Rendered version of the board.<br /> <br /> <br /> <br /> [[File:IoTuz-display-working.jpg|Image 2]]<br /> <br /> Image 2. Working prototype (missing battery holder).</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017&diff=661 2016-12-30T06:11:49Z

<p>Stuart Young: /* Assembly Project */</p> <hr /> <div>'''[https://goo.gl/forms/tGUfEifPP1OZ37082 Registrations now open for the Open Hardware Miniconf 2017]'''<br /> <br /> The Open Hardware Miniconf 2017 will take place as part of [https://linux.conf.au/ LCA 2017] in Hobart, Tasmania, Australia.<br /> <br /> The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and &quot;maker culture&quot;. One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.<br /> <br /> Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.<br /> <br /> The day will run in two distinct halves. The first part of the day will be a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day will be presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day.<br /> <br /> == Venue ==<br /> <br /> We are pleased to announce that we'll be running OHMC2017 in the [http://www.wrestpoint.com.au/conference/wellington-room-,facilities_viewItem_41-en.html Welliington room] at Wrestpoint.<br /> <br /> == Schedule ==<br /> <br /> '''To be announced in detail shortly.'''<br /> <br /> Date: Tuesday 17th January 2017<br /> <br /> * 10:40 - 12:20 '''Assembly workshop''' (registration required to participate, spectators also welcome)<br /> * 12:20 - 1:20 Lunch<br /> * 1:20 - 3:00 '''Assembly workshop continued, Talks'''<br /> * 3:00 - 3:40 Afternoon Tea<br /> * 3:40 - 5:20 '''Talks and finishing off with lightning talks'''<br /> <br /> Usual format for the OpenHardware MiniConf (Construction in the morning followed by talks in the afternoon) is expected.<br /> <br /> === Lightning Talks ===<br /> <br /> * If you'd like to present a 5 minute lightning talk, please email [mailto:andyg@geekscape.org andyg@geekscape.org]<br /> <br /> == Call For Papers ==<br /> <br /> '''Call For Papers is now open.'''<br /> <br /> Please see [[OHC2017-CFP]] for more information<br /> <br /> '''Call For Papers closes at midnight 31st December 2016'''<br /> <br /> == Accepted Papers ==<br /> <br /> '''To be announced.'''<br /> <br /> == Discussion Group ==<br /> <br /> There is a Google Group email list for discussion of topics related to the miniconf, including the assembly session:<br /> <br /> https://groups.google.com/forum/#!forum/open-hardware-conf<br /> <br /> == Assembly Project ==<br /> <br /> Each year we build a project developed for the Miniconf.<br /> <br /> '''The assembly project is still a work in progress.'''<br /> <br /> The project this year is called '''IoTuz -The Internet of Tux'''<br /> <br /> The board is based around the '''ESP32''', which is the big brother successor to the '''ESP8266''' used in the ESPlant project in 2016.<br /> <br /> Estimated cost of the project is AU$120.<br /> <br /> Through hole parts on the board will be assembled on the day, with all the SMD parts being pre-loaded on the board.<br /> <br /> Repository for the project is on Github: https://github.com/CCHS-Melbourne/IoTuz<br /> <br /> [[File:IoTuz.png|Image 1]]<br /> <br /> Image 1. Rendered version of the board.<br /> <br /> <br /> <br /> [[File:IoTuz-display-working.jpg|Image 2]]<br /> <br /> Image 2. Working prototype (missing battery holder).</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017&diff=660 2016-12-30T06:07:05Z

<p>Stuart Young: </p> <hr /> <div>'''[https://goo.gl/forms/tGUfEifPP1OZ37082 Registrations now open for the Open Hardware Miniconf 2017]'''<br /> <br /> The Open Hardware Miniconf 2017 will take place as part of [https://linux.conf.au/ LCA 2017] in Hobart, Tasmania, Australia.<br /> <br /> The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and &quot;maker culture&quot;. One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.<br /> <br /> Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.<br /> <br /> The day will run in two distinct halves. The first part of the day will be a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day will be presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day.<br /> <br /> == Venue ==<br /> <br /> We are pleased to announce that we'll be running OHMC2017 in the [http://www.wrestpoint.com.au/conference/wellington-room-,facilities_viewItem_41-en.html Welliington room] at Wrestpoint.<br /> <br /> == Schedule ==<br /> <br /> '''To be announced in detail shortly.'''<br /> <br /> Date: Tuesday 17th January 2017<br /> <br /> * 10:40 - 12:20 '''Assembly workshop''' (registration required to participate, spectators also welcome)<br /> * 12:20 - 1:20 Lunch<br /> * 1:20 - 3:00 '''Assembly workshop continued, Talks'''<br /> * 3:00 - 3:40 Afternoon Tea<br /> * 3:40 - 5:20 '''Talks and finishing off with lightning talks'''<br /> <br /> Usual format for the OpenHardware MiniConf (Construction in the morning followed by talks in the afternoon) is expected.<br /> <br /> === Lightning Talks ===<br /> <br /> * If you'd like to present a 5 minute lightning talk, please email [mailto:andyg@geekscape.org andyg@geekscape.org]<br /> <br /> == Call For Papers ==<br /> <br /> '''Call For Papers is now open.'''<br /> <br /> Please see [[OHC2017-CFP]] for more information<br /> <br /> '''Call For Papers closes at midnight 31st December 2016'''<br /> <br /> == Accepted Papers ==<br /> <br /> '''To be announced.'''<br /> <br /> == Discussion Group ==<br /> <br /> There is a Google Group email list for discussion of topics related to the miniconf, including the assembly session:<br /> <br /> https://groups.google.com/forum/#!forum/open-hardware-conf<br /> <br /> == Assembly Project ==<br /> <br /> Each year we build a project developed for the Miniconf.<br /> <br /> '''The assembly project is currently being finalised.'''<br /> <br /> The project this year is called '''IoTuz -The Internet of Tux'''<br /> <br /> The board is based around the '''ESP32''', which is the big brother successor to the '''ESP8266''' used in the ESPlant project in 2016.<br /> <br /> Through hole parts on the board will be assembled on the day, with all the SMD parts being pre-loaded on the board.<br /> <br /> Repository for the project is on Github: https://github.com/CCHS-Melbourne/IoTuz<br /> <br /> [[File:IoTuz.png|Image 1]]<br /> <br /> Image 1. Rendered version of the board.<br /> <br /> <br /> <br /> [[File:IoTuz-display-working.jpg|Image 2]]<br /> <br /> Image 2. Working prototype (missing battery holder).</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=Main_Page&diff=659 2016-12-30T06:05:50Z

<p>Stuart Young: </p> <hr /> <div>{{DISPLAYTITLE:Open Hardware Miniconf}}<br /> <br /> '''[https://goo.gl/forms/tGUfEifPP1OZ37082 Registrations now open for the Open Hardware Miniconf 2017]'''<br /> <br /> Details for the Open Hardware Miniconf 2017 are at [[OHC2017]]<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] is a 1-day event that runs as a specialist stream within the [http://linux.conf.au/ linux.conf.au] conference. It gives participants an opportunity to learn basic hardware skills such as soldering, by assembling their own electronic project, and then the afternoon is filled with interesting talks about various projects and techniques related to the morning project and to open hardware in general.<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] began as the Arduino Miniconf in Wellington NZ in 2010 and has run every year since. Although Arduino is still a powerful and popular tool for learning about microcontroller development, the event has now grown in scope to cover broader Open Hardware topics including non-Arduino projects. In 2015, it took on its new identity as the [[OHC2017|Open Hardware Miniconf]] to reflect this broader interest.<br /> <br /> To give you some idea what to expect, this is the hardware assembly session at the LCA2016 Open Hardware Mini-Conference:<br /> <br /> [[File:OHMC2016a.jpg]]<br /> <br /> (Photo by [https://www.flickr.com/photos/geekscape Andy Gelme], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])<br /> <br /> After the assembly session is over the room is cleaned up a bit and the talks begin. It's a fun and educational event!<br /> <br /> Note: To attend you must first register for the main conference, which provides the venue. The [[OHC2017|Open Hardware Miniconf]] is part of LCA as a specialist stream for conference attendees: it's not a stand-alone event. See [http://linux.conf.au/ linux.conf.au] for more information.<br /> <br /> == Registration And Cost ==<br /> Attendance is free (to linux.conf.au delegates) but if you wish to participate in the morning hardware assembly tutorial you will need to pre-register and purchase a kit. Space is limited so get in fast! If you just want to come along and watch or attend the talks, you don't need to do anything. If you wish to participate in the hardware assembly tutorial, please submit the registration form.<br /> <br /> See [[OHC2017|Open Hardware Miniconf 2017]] for more information.<br /> <br /> [[File:OHMC2016b.jpg|320px]]<br /> <br /> (Photo by [https://www.flickr.com/photos/geekscape Andy Gelme], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])<br /> <br /> == Previous Events ==<br /> <br /> For historical reference:<br /> <br /> * [[OHC2017|Open Hardware Miniconf 2017 (Hobart, Australia)]]<br /> * [[OHC2016|Open Hardware Miniconf 2016 (Geelong, Australia)]]<br /> * [[OHC2015|Open Hardware Miniconf 2015 (Auckland, New Zealand)]]<br /> * [[AMC2014|Arduino Miniconf 2014 (Perth, Australia)]]<br /> * [[AMC2013|Arduino Miniconf 2013 (Canberra, Australia)]]<br /> * [[AMC2012|Arduino Miniconf 2012 (Ballarat, Australia)]]<br /> * [[AMC2011|Arduino Miniconf 2011 (Brisbane, Australia)]]<br /> * [[AMC2010|Arduino Miniconf 2010 (Wellington, New Zealand)]]</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=Main_Page&diff=650 2016-12-30T00:13:18Z

<p>Stuart Young: </p> <hr /> <div>{{DISPLAYTITLE:Open Hardware Miniconf}}<br /> <br /> '''Registrations for the Open Hardware Miniconf 2017 will open soon.'''<br /> <br /> Details for the Open Hardware Miniconf 2017 are at [[OHC2017]]<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] is a 1-day event that runs as a specialist stream within the [http://linux.conf.au/ linux.conf.au] conference. It gives participants an opportunity to learn basic hardware skills such as soldering, by assembling their own electronic project, and then the afternoon is filled with interesting talks about various projects and techniques related to the morning project and to open hardware in general.<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] began as the Arduino Miniconf in Wellington NZ in 2010 and has run every year since. Although Arduino is still a powerful and popular tool for learning about microcontroller development, the event has now grown in scope to cover broader Open Hardware topics including non-Arduino projects. In 2015, it took on its new identity as the [[OHC2017|Open Hardware Miniconf]] to reflect this broader interest.<br /> <br /> To give you some idea what to expect, this is the hardware assembly session at the 2011 Arduino Miniconf:<br /> <br /> [[File:amc-2011.jpg]]<br /> <br /> (Photo by [http://www.flickr.com/photos/karora/5383488664/ Andrew McMillan], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])<br /> <br /> After the assembly session is over the room is cleaned up a bit and the talks begin. It's a fun and educational event!<br /> <br /> Note that to attend you must first register for the main conference, which provides the venue. The [[OHC2017|Open Hardware Miniconf]] is part of LCA as a specialist stream for conference attendees: it's not a stand-alone event. See [http://linux.conf.au/ linux.conf.au] for more information.<br /> <br /> == Registration And Cost ==<br /> Attendance is free (to linux.conf.au delegates) but if you wish to participate in the morning hardware assembly tutorial you will need to pre-register and purchase a kit. Space is limited so get in fast! If you just want to come along and watch or attend the talks, you don't need to do anything. If you wish to participate in the hardware assembly tutorial, please submit the registration form.<br /> <br /> See [[OHC2017|Open Hardware Miniconf 2017]] for more information.<br /> <br /> == Previous Events ==<br /> <br /> For historical reference:<br /> <br /> * [[OHC2016|Open Hardware Miniconf 2016 (Geelong, Australia)]]<br /> * [[OHC2015|Open Hardware Miniconf 2015 (Auckland, New Zealand)]]<br /> * [[AMC2014|Arduino Miniconf 2014 (Perth, Australia)]]<br /> * [[AMC2013|Arduino Miniconf 2013 (Canberra, Australia)]]<br /> * [[AMC2012|Arduino Miniconf 2012 (Ballarat, Australia)]]<br /> * [[AMC2011|Arduino Miniconf 2011 (Brisbane, Australia)]]<br /> * [[AMC2010|Arduino Miniconf 2010 (Wellington, New Zealand)]]</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=Main_Page&diff=649 2016-12-26T07:11:17Z

<p>Stuart Young: </p> <hr /> <div>{{DISPLAYTITLE:Open Hardware Miniconf}}<br /> <br /> '''Registrations for the Open Hardware Miniconf 2017 will open soon.'''<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] is a 1-day event that runs as a specialist stream within the [http://linux.conf.au/ linux.conf.au] conference. It gives participants an opportunity to learn basic hardware skills such as soldering, by assembling their own electronic project, and then the afternoon is filled with interesting talks about various projects and techniques related to the morning project and to open hardware in general.<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] began as the Arduino Miniconf in Wellington NZ in 2010 and has run every year since. Although Arduino is still a powerful and popular tool for learning about microcontroller development, the event has now grown in scope to cover broader Open Hardware topics including non-Arduino projects. In 2015, it took on its new identity as the [[OHC2017|Open Hardware Miniconf]] to reflect this broader interest.<br /> <br /> To give you some idea what to expect, this is the hardware assembly session at the 2011 Arduino Miniconf:<br /> <br /> [[File:amc-2011.jpg]]<br /> <br /> (Photo by [http://www.flickr.com/photos/karora/5383488664/ Andrew McMillan], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])<br /> <br /> After the assembly session is over the room is cleaned up a bit and the talks begin. It's a fun and educational event!<br /> <br /> Note that to attend you must first register for the main conference, which provides the venue. The [[OHC2017|Open Hardware Miniconf]] is part of LCA as a specialist stream for conference attendees: it's not a stand-alone event. See [http://linux.conf.au/ linux.conf.au] for more information.<br /> <br /> == Registration And Cost ==<br /> Attendance is free (to linux.conf.au delegates) but if you wish to participate in the morning hardware assembly tutorial you will need to pre-register and purchase a kit. Space is limited so get in fast! If you just want to come along and watch or attend the talks, you don't need to do anything. If you wish to participate in the hardware assembly tutorial, please submit the registration form.<br /> <br /> See [[OHC2017|Open Hardware Miniconf 2017]] for more information.<br /> <br /> == Previous Events ==<br /> <br /> For historical reference:<br /> <br /> * [[OHC2016|Open Hardware Miniconf 2016 (Geelong, Australia)]]<br /> * [[OHC2015|Open Hardware Miniconf 2015 (Auckland, New Zealand)]]<br /> * [[AMC2014|Arduino Miniconf 2014 (Perth, Australia)]]<br /> * [[AMC2013|Arduino Miniconf 2013 (Canberra, Australia)]]<br /> * [[AMC2012|Arduino Miniconf 2012 (Ballarat, Australia)]]<br /> * [[AMC2011|Arduino Miniconf 2011 (Brisbane, Australia)]]<br /> * [[AMC2010|Arduino Miniconf 2010 (Wellington, New Zealand)]]</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017&diff=648 2016-12-26T07:06:51Z

<p>Stuart Young: /* Assembly Project */</p> <hr /> <div>'''Registration is not yet open. Please check back on Tuesday 27th December 2016'''<br /> <br /> The Open Hardware Miniconf 2017 will take place as part of LCA 2017 in Hobart, Tasmania, Australia.<br /> <br /> The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and &quot;maker culture&quot;. One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.<br /> <br /> Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.<br /> <br /> The day will run in two distinct halves. The first part of the day will be a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day will be presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day.<br /> <br /> == Venue ==<br /> <br /> We are pleased to announce that we'll be running OHMC2017 in the [http://www.wrestpoint.com.au/conference/wellington-room-,facilities_viewItem_41-en.html Welliington room] at Wrestpoint.<br /> <br /> == Schedule ==<br /> <br /> '''To be announced in detail shortly.'''<br /> <br /> Date: Tuesday 17th January 2017<br /> <br /> * 10:40 - 12:20 '''Assembly workshop''' (registration required to participate, spectators also welcome)<br /> * 12:20 - 1:20 Lunch<br /> * 1:20 - 3:00 '''Assembly workshop continued, Talks'''<br /> * 3:00 - 3:40 Afternoon Tea<br /> * 3:40 - 5:20 '''Talks and finishing off with lightning talks'''<br /> <br /> Usual format for the OpenHardware MiniConf (Construction in the morning followed by talks in the afternoon) is expected.<br /> <br /> === Lightning Talks ===<br /> <br /> * If you'd like to present a 5 minute lightning talk, please email [mailto:andyg@geekscape.org andyg@geekscape.org]<br /> <br /> == Call For Papers ==<br /> <br /> '''Call For Papers is now open.'''<br /> <br /> Please see [[OHC2017-CFP]] for more information<br /> <br /> '''Call For Papers closes at midnight 31st December 2016'''<br /> <br /> == Accepted Papers ==<br /> <br /> '''To be announced.'''<br /> <br /> == Discussion Group ==<br /> <br /> There is a Google Group email list for discussion of topics related to the miniconf, including the assembly session:<br /> <br /> https://groups.google.com/forum/#!forum/open-hardware-conf<br /> <br /> == Assembly Project ==<br /> <br /> Each year we build a project developed for the Miniconf.<br /> <br /> '''The assembly project is currently being finalised.'''<br /> <br /> The project this year is called '''IoTuz -The Internet of Tux'''<br /> <br /> The board is based around the '''ESP32''', which is the big brother successor to the '''ESP8266''' used in the ESPlant project in 2016.<br /> <br /> Through hole parts on the board will be assembled on the day, with all the SMD parts being pre-loaded on the board.<br /> <br /> Repository for the project is on Github: https://github.com/CCHS-Melbourne/IoTuz<br /> <br /> [[File:IoTuz.png|Image 1]]<br /> <br /> Image 1. Rendered version of the board.<br /> <br /> <br /> <br /> [[File:IoTuz-display-working.jpg|Image 2]]<br /> <br /> Image 2. Working prototype (missing battery holder).</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=File:IoTuz-display-working.jpg&diff=647 2016-12-26T07:04:17Z

<p>Stuart Young: </p> <hr /> <div></div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017&diff=646 2016-12-26T06:54:46Z

<p>Stuart Young: /* Assembly Project */</p> <hr /> <div>'''Registration is not yet open. Please check back on Tuesday 27th December 2016'''<br /> <br /> The Open Hardware Miniconf 2017 will take place as part of LCA 2017 in Hobart, Tasmania, Australia.<br /> <br /> The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and &quot;maker culture&quot;. One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.<br /> <br /> Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.<br /> <br /> The day will run in two distinct halves. The first part of the day will be a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day will be presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day.<br /> <br /> == Venue ==<br /> <br /> We are pleased to announce that we'll be running OHMC2017 in the [http://www.wrestpoint.com.au/conference/wellington-room-,facilities_viewItem_41-en.html Welliington room] at Wrestpoint.<br /> <br /> == Schedule ==<br /> <br /> '''To be announced in detail shortly.'''<br /> <br /> Date: Tuesday 17th January 2017<br /> <br /> * 10:40 - 12:20 '''Assembly workshop''' (registration required to participate, spectators also welcome)<br /> * 12:20 - 1:20 Lunch<br /> * 1:20 - 3:00 '''Assembly workshop continued, Talks'''<br /> * 3:00 - 3:40 Afternoon Tea<br /> * 3:40 - 5:20 '''Talks and finishing off with lightning talks'''<br /> <br /> Usual format for the OpenHardware MiniConf (Construction in the morning followed by talks in the afternoon) is expected.<br /> <br /> === Lightning Talks ===<br /> <br /> * If you'd like to present a 5 minute lightning talk, please email [mailto:andyg@geekscape.org andyg@geekscape.org]<br /> <br /> == Call For Papers ==<br /> <br /> '''Call For Papers is now open.'''<br /> <br /> Please see [[OHC2017-CFP]] for more information<br /> <br /> '''Call For Papers closes at midnight 31st December 2016'''<br /> <br /> == Accepted Papers ==<br /> <br /> '''To be announced.'''<br /> <br /> == Discussion Group ==<br /> <br /> There is a Google Group email list for discussion of topics related to the miniconf, including the assembly session:<br /> <br /> https://groups.google.com/forum/#!forum/open-hardware-conf<br /> <br /> == Assembly Project ==<br /> <br /> Each year we build a project developed for the Miniconf.<br /> <br /> '''The assembly project is currently being finalised.'''<br /> <br /> The project this year is called '''IoTuz -The Internet of Tux'''<br /> <br /> The board is based around the '''ESP32''', which is the big brother successor to the '''ESP8266''' used in the ESPlant project in 2016.<br /> <br /> Through hole parts on the board will be assembled on the day, with all the SMD parts being pre-loaded on the board.<br /> <br /> Repository for the project is on Github: https://github.com/CCHS-Melbourne/IoTuz<br /> <br /> [[File:IoTuz.png]]<br /> <br /> More details to follow.</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=Main_Page&diff=643 2016-12-22T07:53:18Z

<p>Stuart Young: </p> <hr /> <div>{{DISPLAYTITLE:Open Hardware Miniconf}}<br /> <br /> '''Registrations for the Open Hardware Miniconf 2017 will open soon.'''<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] is a 1-day event that runs as a specialist stream within the [http://linux.conf.au/ linux.conf.au] conference. It gives participants an opportunity to learn basic hardware skills such as soldering, by assembling their own electronic project, and then the afternoon is filled with interesting talks about various projects and techniques related to the morning project and to open hardware in general.<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] began as the Arduino Miniconf in Wellington NZ in 2010 and has run every year since. Although Arduino is still a powerful and popular tool for learning about microcontroller development, the event has now grown in scope to cover broader Open Hardware topics including non-Arduino projects. In 2015, it took on its new identity as the [[OHC2017|Open Hardware Miniconf]] to reflect this broader interest.<br /> <br /> To give you some idea what to expect, this is the hardware assembly session at the 2011 Arduino Miniconf:<br /> <br /> [[File:amc-2011.jpg]]<br /> <br /> (Photo by [http://www.flickr.com/photos/karora/5383488664/ Andrew McMillan], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])<br /> <br /> After the assembly session is over the room is cleaned up a bit and the talks begin. It's a fun and educational event!<br /> <br /> Note that to attend you must first register for the main conference, which provides the venue. The [[OHC2017|Open Hardware Miniconf]] is part of LCA as a specialist stream for conference attendees: it's not a stand-alone event. See [http://linux.conf.au/ linux.conf.au] for more information.<br /> <br /> == Registration And Cost ==<br /> Attendance is free (to linux.conf.au delegates) but if you wish to participate in the morning hardware assembly tutorial you will need to pre-register and purchase a kit. Space is limited so get in fast! If you just want to come along and watch or attend the talks, you don't need to do anything. If you wish to participate in the hardware assembly tutorial, please submit the registration form.<br /> <br /> See [[OHC2017|Open Hardware Miniconf]] for more information.<br /> <br /> == Previous Events ==<br /> <br /> For historical reference:<br /> <br /> * [[OHC2016|Open Hardware Miniconf 2016 (Geelong, Australia)]]<br /> * [[OHC2015|Open Hardware Miniconf 2015 (Auckland, New Zealand)]]<br /> * [[AMC2014|Arduino Miniconf 2014 (Perth, Australia)]]<br /> * [[AMC2013|Arduino Miniconf 2013 (Canberra, Australia)]]<br /> * [[AMC2012|Arduino Miniconf 2012 (Ballarat, Australia)]]<br /> * [[AMC2011|Arduino Miniconf 2011 (Brisbane, Australia)]]<br /> * [[AMC2010|Arduino Miniconf 2010 (Wellington, New Zealand)]]</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=Main_Page&diff=642 2016-12-22T07:52:48Z

<p>Stuart Young: </p> <hr /> <div>{{DISPLAYTITLE:Open Hardware Miniconf}}<br /> <br /> '''Registrations for 2017 will open soon.'''<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] is a 1-day event that runs as a specialist stream within the [http://linux.conf.au/ linux.conf.au] conference. It gives participants an opportunity to learn basic hardware skills such as soldering, by assembling their own electronic project, and then the afternoon is filled with interesting talks about various projects and techniques related to the morning project and to open hardware in general.<br /> <br /> The [[OHC2017|Open Hardware Miniconf]] began as the Arduino Miniconf in Wellington NZ in 2010 and has run every year since. Although Arduino is still a powerful and popular tool for learning about microcontroller development, the event has now grown in scope to cover broader Open Hardware topics including non-Arduino projects. In 2015, it took on its new identity as the [[OHC2017|Open Hardware Miniconf]] to reflect this broader interest.<br /> <br /> To give you some idea what to expect, this is the hardware assembly session at the 2011 Arduino Miniconf:<br /> <br /> [[File:amc-2011.jpg]]<br /> <br /> (Photo by [http://www.flickr.com/photos/karora/5383488664/ Andrew McMillan], [http://creativecommons.org/licenses/by/2.0/deed.en CC2.0])<br /> <br /> After the assembly session is over the room is cleaned up a bit and the talks begin. It's a fun and educational event!<br /> <br /> Note that to attend you must first register for the main conference, which provides the venue. The [[OHC2017|Open Hardware Miniconf]] is part of LCA as a specialist stream for conference attendees: it's not a stand-alone event. See [http://linux.conf.au/ linux.conf.au] for more information.<br /> <br /> == Registration And Cost ==<br /> Attendance is free (to linux.conf.au delegates) but if you wish to participate in the morning hardware assembly tutorial you will need to pre-register and purchase a kit. Space is limited so get in fast! If you just want to come along and watch or attend the talks, you don't need to do anything. If you wish to participate in the hardware assembly tutorial, please submit the registration form.<br /> <br /> See [[OHC2017|Open Hardware Miniconf]] for more information.<br /> <br /> == Previous Events ==<br /> <br /> For historical reference:<br /> <br /> * [[OHC2016|Open Hardware Miniconf 2016 (Geelong, Australia)]]<br /> * [[OHC2015|Open Hardware Miniconf 2015 (Auckland, New Zealand)]]<br /> * [[AMC2014|Arduino Miniconf 2014 (Perth, Australia)]]<br /> * [[AMC2013|Arduino Miniconf 2013 (Canberra, Australia)]]<br /> * [[AMC2012|Arduino Miniconf 2012 (Ballarat, Australia)]]<br /> * [[AMC2011|Arduino Miniconf 2011 (Brisbane, Australia)]]<br /> * [[AMC2010|Arduino Miniconf 2010 (Wellington, New Zealand)]]</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017&diff=641 2016-12-22T05:17:40Z

<p>Stuart Young: /* Schedule */</p> <hr /> <div>'''Registration is not yet open.'''<br /> <br /> The Open Hardware Miniconf 2017 will take place as part of LCA 2017 in Hobart, Tasmania, Australia.<br /> <br /> The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and &quot;maker culture&quot;. One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.<br /> <br /> Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.<br /> <br /> The day will run in two distinct halves. The first part of the day will be a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day will be presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day.<br /> <br /> == Venue ==<br /> <br /> We are pleased to announce that we'll be running OHMC2017 in the Wellington room at Wrestpoint.<br /> <br /> http://www.wrestpoint.com.au/conference/wellington-room-,facilities_viewItem_41-en.html<br /> <br /> == Schedule ==<br /> <br /> '''To be announced in detail shortly.'''<br /> <br /> Date: Tuesday 17th January 2017<br /> <br /> * 10:40 - 12:20 '''Assembly workshop''' (registration required to participate, spectators also welcome)<br /> * 12:20 - 1:20 Lunch<br /> * 1:20 - 3:00 '''Assembly workshop continued, Talks'''<br /> * 3:00 - 3:40 Afternoon Tea<br /> * 3:40 - 5:20 '''Talks, Lightning talks, project showcase, general discussion'''<br /> <br /> Usual format for the OpenHardware MiniConf (Construction in the morning followed by talks in the afternoon) is expected.<br /> <br /> === Lightning Talks ===<br /> <br /> * If you'd like to present a 5 minute lightning talk, please email [mailto:andyg@geekscape.org andyg@geekscape.org]<br /> <br /> == Call For Papers ==<br /> <br /> '''Call For Papers is now open.'''<br /> <br /> Please see [[OHC2017-CFP]] for more information<br /> <br /> '''Call For Papers closes at Midnight 31st December 2016'''<br /> <br /> == Accepted Papers ==<br /> <br /> '''To be announced.'''<br /> <br /> == Discussion Group ==<br /> <br /> There is a Google Group email list for discussion of topics related to the miniconf, including the assembly session:<br /> <br /> https://groups.google.com/forum/#!forum/open-hardware-conf<br /> <br /> == Assembly Project ==<br /> <br /> Each year we build a project developed for the Miniconf.<br /> <br /> '''The assembly project is currently being finalised.'''<br /> <br /> The project this year is called '''IoTuz -The Internet of Tux'''<br /> <br /> The board is based around the '''ESP32''', which is the big brother successor to the '''ESP8266''' used in the ESPlant project in 2016.<br /> <br /> Through hole parts on the board will be assembled on the day, with all the SMD parts being pre-loaded on the board.<br /> <br /> [[File:IoTuz.png]]<br /> <br /> More details to follow.</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017&diff=640 2016-12-22T04:36:49Z

<p>Stuart Young: /* Final schedule */</p> <hr /> <div>'''Registration is not yet open.'''<br /> <br /> The Open Hardware Miniconf 2017 will take place as part of LCA 2017 in Hobart, Tasmania, Australia.<br /> <br /> The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and &quot;maker culture&quot;. One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.<br /> <br /> Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.<br /> <br /> The day will run in two distinct halves. The first part of the day will be a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day will be presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day.<br /> <br /> == Venue ==<br /> <br /> We are pleased to announce that we'll be running OHMC2017 in the Wellington room at Wrestpoint.<br /> <br /> http://www.wrestpoint.com.au/conference/wellington-room-,facilities_viewItem_41-en.html<br /> <br /> == Schedule ==<br /> <br /> '''To be announced in detail shortly.'''<br /> Date: Tuesday 17th January 2017<br /> <br /> * 10:40 - 12:20 '''Assembly workshop''' (registration required to participate, spectators also welcome)<br /> * 12:20 - 1:20 Lunch<br /> * 1:20 - 3:00 '''Assembly workshop continued, Talks'''<br /> * 3:00 - 3:40 Afternoon Tea<br /> * 3:40 - 5:20 '''Talks, Lightning talks, project showcase, general discussion'''<br /> <br /> Usual format for the OpenHardware MiniConf (Construction in the morning followed by talks in the afternoon) is expected.<br /> <br /> === Lightning Talks ===<br /> <br /> * If you'd like to present a 5 minute lightning talk, please email [mailto:andyg@geekscape.org andyg@geekscape.org]<br /> <br /> == Call For Papers ==<br /> <br /> '''Call For Papers is now open.'''<br /> <br /> Please see [[OHC2017-CFP]] for more information<br /> <br /> '''Call For Papers closes at Midnight 31st December 2016'''<br /> <br /> == Accepted Papers ==<br /> <br /> '''To be announced.'''<br /> <br /> == Discussion Group ==<br /> <br /> There is a Google Group email list for discussion of topics related to the miniconf, including the assembly session:<br /> <br /> https://groups.google.com/forum/#!forum/open-hardware-conf<br /> <br /> == Assembly Project ==<br /> <br /> Each year we build a project developed for the Miniconf.<br /> <br /> '''The assembly project is currently being finalised.'''<br /> <br /> The project this year is called '''IoTuz -The Internet of Tux'''<br /> <br /> The board is based around the '''ESP32''', which is the big brother successor to the '''ESP8266''' used in the ESPlant project in 2016.<br /> <br /> Through hole parts on the board will be assembled on the day, with all the SMD parts being pre-loaded on the board.<br /> <br /> [[File:IoTuz.png]]<br /> <br /> More details to follow.</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017&diff=639 2016-12-22T04:36:40Z

<p>Stuart Young: /* Final schedule */</p> <hr /> <div>'''Registration is not yet open.'''<br /> <br /> The Open Hardware Miniconf 2017 will take place as part of LCA 2017 in Hobart, Tasmania, Australia.<br /> <br /> The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and &quot;maker culture&quot;. One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.<br /> <br /> Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.<br /> <br /> The day will run in two distinct halves. The first part of the day will be a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day will be presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day.<br /> <br /> == Venue ==<br /> <br /> We are pleased to announce that we'll be running OHMC2017 in the Wellington room at Wrestpoint.<br /> <br /> http://www.wrestpoint.com.au/conference/wellington-room-,facilities_viewItem_41-en.html<br /> <br /> == Final schedule ==<br /> <br /> '''To be announced in detail shortly.'''<br /> Date: Tuesday 17th January 2017<br /> <br /> * 10:40 - 12:20 '''Assembly workshop''' (registration required to participate, spectators also welcome)<br /> * 12:20 - 1:20 Lunch<br /> * 1:20 - 3:00 '''Assembly workshop continued, Talks'''<br /> * 3:00 - 3:40 Afternoon Tea<br /> * 3:40 - 5:20 '''Talks, Lightning talks, project showcase, general discussion'''<br /> <br /> Usual format for the OpenHardware MiniConf (Construction in the morning followed by talks in the afternoon) is expected.<br /> <br /> === Lightning Talks ===<br /> <br /> * If you'd like to present a 5 minute lightning talk, please email [mailto:andyg@geekscape.org andyg@geekscape.org]<br /> <br /> == Call For Papers ==<br /> <br /> '''Call For Papers is now open.'''<br /> <br /> Please see [[OHC2017-CFP]] for more information<br /> <br /> '''Call For Papers closes at Midnight 31st December 2016'''<br /> <br /> == Accepted Papers ==<br /> <br /> '''To be announced.'''<br /> <br /> == Discussion Group ==<br /> <br /> There is a Google Group email list for discussion of topics related to the miniconf, including the assembly session:<br /> <br /> https://groups.google.com/forum/#!forum/open-hardware-conf<br /> <br /> == Assembly Project ==<br /> <br /> Each year we build a project developed for the Miniconf.<br /> <br /> '''The assembly project is currently being finalised.'''<br /> <br /> The project this year is called '''IoTuz -The Internet of Tux'''<br /> <br /> The board is based around the '''ESP32''', which is the big brother successor to the '''ESP8266''' used in the ESPlant project in 2016.<br /> <br /> Through hole parts on the board will be assembled on the day, with all the SMD parts being pre-loaded on the board.<br /> <br /> [[File:IoTuz.png]]<br /> <br /> More details to follow.</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017&diff=638 2016-12-22T02:09:38Z

<p>Stuart Young: </p> <hr /> <div>'''Registration is not yet open.'''<br /> <br /> The Open Hardware Miniconf 2017 will take place as part of LCA 2017 in Hobart, Tasmania, Australia.<br /> <br /> The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and &quot;maker culture&quot;. One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.<br /> <br /> Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.<br /> <br /> The day will run in two distinct halves. The first part of the day will be a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day will be presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day.<br /> <br /> == Venue ==<br /> <br /> We are pleased to announce that we'll be running OHMC2017 in the Wellington room at Wrestpoint.<br /> <br /> http://www.wrestpoint.com.au/conference/wellington-room-,facilities_viewItem_41-en.html<br /> <br /> == Final schedule ==<br /> <br /> '''To be announced.'''<br /> <br /> Usual format for the OpenHardware MiniConf (Construction in the morning followed by talks in the afternoon) is expected.<br /> <br /> === Lightning Talks ===<br /> <br /> * If you'd like to present a 5 minute lightning talk, please email [mailto:andyg@geekscape.org andyg@geekscape.org]<br /> <br /> == Call For Papers ==<br /> <br /> '''Call For Papers is now open.'''<br /> <br /> Please see [[OHC2017-CFP]] for more information<br /> <br /> '''Call For Papers closes at Midnight 31st December 2016'''<br /> <br /> == Accepted Papers ==<br /> <br /> '''To be announced.'''<br /> <br /> == Discussion Group ==<br /> <br /> There is a Google Group email list for discussion of topics related to the miniconf, including the assembly session:<br /> <br /> https://groups.google.com/forum/#!forum/open-hardware-conf<br /> <br /> == Assembly Project ==<br /> <br /> Each year we build a project developed for the Miniconf.<br /> <br /> '''The assembly project is currently being finalised.'''<br /> <br /> The project this year is called '''IoTuz -The Internet of Tux'''<br /> <br /> The board is based around the '''ESP32''', which is the big brother successor to the '''ESP8266''' used in the ESPlant project in 2016.<br /> <br /> Through hole parts on the board will be assembled on the day, with all the SMD parts being pre-loaded on the board.<br /> <br /> [[File:IoTuz.png]]<br /> <br /> More details to follow.</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=File:IoTuz.png&diff=637 2016-12-22T02:09:06Z

<p>Stuart Young: Stuart Young uploaded a new version of File:IoTuz.png</p> <hr /> <div>Dev pic of the IoTuz</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=File:IoTuz.png&diff=636 2016-12-22T02:01:36Z

<p>Stuart Young: Dev pic of the IoTuz</p> <hr /> <div>Dev pic of the IoTuz</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017&diff=635 2016-12-22T01:56:47Z

<p>Stuart Young: /* Call For Papers */</p> <hr /> <div>'''Registration is not yet open.'''<br /> <br /> The Open Hardware Miniconf 2017 will take place as part of LCA 2017 in Hobart, Tasmania, Australia.<br /> <br /> The concept of Free / Open Source Software, already well understood by LCA attendees, is complemented by a rapidly growing community focused around Open Hardware and &quot;maker culture&quot;. One of the drivers of the popularity of the Open Hardware community is easy access to cheap devices such as Arduino, which is a microcontroller development board originally intended for classroom use but now a popular building block in all sorts of weird and wonderful hobbyist and professional projects.<br /> <br /> Interest in Open Hardware is high among FOSS enthusiasts but there is also a barrier to entry with the perceived difficulty and dangers of dealing with hot soldering irons, unknown components and unfamiliar naming schemes. The miniconf will use an Open Hardware assembly project as a stepping stone to help ease software developers into dealing with Open Hardware. Topics will cover both software and hardware issues, starting with simpler sessions suitable for Open Hardware beginners and progressing through to more advanced topics.<br /> <br /> The day will run in two distinct halves. The first part of the day will be a hands-on assembly session where participants will have the chance to assemble a special hardware project developed for the miniconf. Instructors will be on hand to assist with soldering and the other mysteries of hardware assembly. The second part of the day will be presentations about Open Hardware topics, including information on software to run on the hardware project built earlier in the day.<br /> <br /> == Venue ==<br /> <br /> We are pleased to announce that we'll be running OHMC2017 in the Wellington room at Wrestpoint.<br /> <br /> http://www.wrestpoint.com.au/conference/wellington-room-,facilities_viewItem_41-en.html<br /> <br /> == Final schedule ==<br /> <br /> '''To be announced.'''<br /> <br /> Usual format for the OpenHardware MiniConf (Construction in the morning followed by talks in the afternoon) is expected.<br /> <br /> === Lightning Talks ===<br /> <br /> * If you'd like to present a 5 minute lightning talk, please email [mailto:andyg@geekscape.org andyg@geekscape.org]<br /> <br /> == Call For Papers ==<br /> <br /> '''Call For Papers is now open.'''<br /> <br /> Please see [[OHC2017-CFP]] for more information<br /> <br /> '''Call For Papers closes at Midnight 31st December 2016'''<br /> <br /> == Accepted Papers ==<br /> <br /> '''To be announced.'''<br /> <br /> == Discussion Group ==<br /> <br /> There is a Google Group email list for discussion of topics related to the miniconf, including the assembly session:<br /> <br /> https://groups.google.com/forum/#!forum/open-hardware-conf<br /> <br /> == Assembly Project ==<br /> <br /> Each year we build a project developed for the Miniconf.<br /> <br /> '''The assembly project is currently being finalised.'''<br /> <br /> The project this year is called '''IoTuz -The Internet of Tux'''<br /> <br /> The board is based around the '''ESP32''', which is the big brother successor to the '''ESP8266''' used in the ESPlant project in 2016.<br /> <br /> Through hole parts on the board will be assembled on the day, with all the SMD parts being pre-loaded on the board.<br /> <br /> More details to follow.</div>

Stuart Young http://www.openhardwareconf.org/index.php?title=OHC2017-CFP&diff=634 2016-12-22T01:55:45Z

<p>Stuart Young: /* OHC 2017 Call For Presentations */</p> <hr /> <div>== OHC 2017 Call For Presentations ==<br /> <br /> '''Deadline for submissions is Midnight 31st December 2016.'''<br /> <br /> === Presentation Types ===<br /> The Open Hardware Miniconf will follow a similar format to the Arduino Miniconf which has run in previous years, with a hardware assembly project in the morning (for registered attendees) and a variety of presentations in the afternoon that can be attended by any [http://linux.conf.au LCA2017] delegates. Time in the afternoon has been structured to allow for both full presentations and lightning talks:<br /> <br /> Full presentations are '''20 minutes'''.&lt;br /&gt;<br /> Lightning talks are '''5 minutes'''.<br /> <br /> This is a friendly environment in which to make an informal low-stress presentation, so it’s a great opportunity if you haven’t done conference presentations before.<br /> <br /> === Topics ===<br /> Your talk can cover just about anything related to Open Hardware, such as:<br /> <br /> * A show-and-tell for one of your projects<br /> * Design techniques<br /> * Basic electronics for software developers<br /> * Interfacing with hardware, e.g sensors, actuators, displays, motors, geiger counters<br /> * Driver or library development for embedded systems<br /> * Development environments, software, and tools<br /> * Working within microcontroller limitations<br /> * Internet of Things, wearable computing, vehicle telemetry<br /> * Licensing for hardware<br /> * The business aspects of Open Hardware<br /> <br /> The audience will consist primarily of software developers, since this event takes place as an adjunct to [http://linux.conf.au linux.conf.au]. What the Open Hardware Miniconf does is give the hard-core devs who typically attend linux.conf.au an opportunity to experience the joy of hardware hacking (http://jon.oxer.com.au/blog/id/358).<br /> <br /> === Submitting a Proposal ===<br /> So if you are attending [http://linux.conf.au LCA2017] (Hobart) in January and would like to present, please email [mailto:andyg@geekscape.org?subject=OHC2017-cfp andyg@geekscape.org] with:<br /> <br /> * Your name<br /> * Brief biography (noting any previous speaking experience)<br /> * Talk title<br /> * Brief outline of your proposed talk<br /> * Notes of any special equipment / facilities you may require<br /> * Talk type (20 minute presentation or 5 minute lightning talk)<br /> <br /> This only needs to be a few sentences: don't spend days on your proposal, just put it down in a quick email. We can always discuss details later if required.<br /> <br /> === Recording and Licensing ===<br /> <br /> To increase the number of people that can view your presentation, linux.conf.au might record your talk and make it publicly available after the event. When submitting your proposal you will be asked to release materials relating to your presentation under a Creative Commons ShareAlike License. Additionally, if you are discussing specific software or hardware in your presentation, you must ensure that it has an appropriate open licence.<br /> <br /> All presentation material should be suitable for people aged 12 and above. All presentations are subject to Linux Australia's code of conduct, including that they must not contain:<br /> <br /> * Sexual or violent imagery<br /> * Exclusionary language<br /> * Language which is not appropriate for an all-ages audience<br /> <br /> For more information on the LCA presentation policies etc, see: https://linux.conf.au/proposals/</div>

Stuart Young