Difference between revisions of "Rocking FPGA SAO Installation"
(Created page with "= Overview = '''GitHub repository:''' [https://github.com/geekscape/ohmc2022-firmware https://github.com/geekscape/ohmc2022-firmware] : FPGA gateware and firmware for the Ro...") |
|||
| Line 3: | Line 3: | ||
'''GitHub repository:''' [https://github.com/geekscape/ohmc2022-firmware https://github.com/geekscape/ohmc2022-firmware] | '''GitHub repository:''' [https://github.com/geekscape/ohmc2022-firmware https://github.com/geekscape/ohmc2022-firmware] | ||
| − | + | FPGA gateware and firmware for the Rockling FPGA SAO (''codec'' branch) currently supports the Theremin input (dual input frequency counters), the FPGA running a soft RISC-V processor and hardware peripherals. However, the STGL-5000 audio codec IC integration is still a work-in-progress. | |
| − | = | + | = Set-up USB hot-plug UDEV rules (for Linux only) = |
| − | <code> | + | When the Rockling is connected to the computer's USB port, the dynamically created device file <code>/dev/bus/usb/001/...</code> will need to have the correct permissions set by the UDEV rules. |
| − | git clone https://github.com/geekscape/ohmc2022-firmware.git --branch codec | + | |
| − | + | From [https://workshop.fomu.im/en/latest/requirements/drivers.html FOMU workshop instructions] | |
| + | |||
| + | sudo groupadd plugdev | ||
| + | sudo usermod -a -G plugdev $USER | ||
| + | |||
| + | Log out and log in again | ||
| + | |||
| + | sudo bash | ||
| + | vi /etc/group # Add users to "plugdev:x:46:$USER" | ||
| + | vi /etc/udev/rules.d/99-fomu.rules | ||
| + | SUBSYSTEM=="usb", ATTRS{idVendor}=="1209", ATTRS{idProduct}=="5bf0", MODE="0664", GROUP="plugdev" | ||
| + | udevadm control --reload-rules | ||
| + | udevadm trigger | ||
| + | |||
| + | = Download FPGA development software = | ||
| + | |||
| + | git clone https://github.com/geekscape/ohmc2022-firmware.git --branch codec | ||
Revision as of 17:54, 12 March 2023
Overview
GitHub repository: https://github.com/geekscape/ohmc2022-firmware
FPGA gateware and firmware for the Rockling FPGA SAO (codec branch) currently supports the Theremin input (dual input frequency counters), the FPGA running a soft RISC-V processor and hardware peripherals. However, the STGL-5000 audio codec IC integration is still a work-in-progress.
Set-up USB hot-plug UDEV rules (for Linux only)
When the Rockling is connected to the computer's USB port, the dynamically created device file /dev/bus/usb/001/... will need to have the correct permissions set by the UDEV rules.
From FOMU workshop instructions
sudo groupadd plugdev sudo usermod -a -G plugdev $USER
Log out and log in again
sudo bash
vi /etc/group # Add users to "plugdev:x:46:$USER"
vi /etc/udev/rules.d/99-fomu.rules
SUBSYSTEM=="usb", ATTRS{idVendor}=="1209", ATTRS{idProduct}=="5bf0", MODE="0664", GROUP="plugdev"
udevadm control --reload-rules
udevadm trigger
Download FPGA development software
git clone https://github.com/geekscape/ohmc2022-firmware.git --branch codec
