SimpleBot-Assembly

From Open Hardware Miniconf
Revision as of 22:08, 21 December 2014 by Angus Gratton (talk | contribs)
Jump to: navigation, search

Check Parts In Kit

Your kit should contain the following items:

SimpleBot-labelled-parts.png

Some items are not shown in the photo:

  • Cable ties
  • MicroSD to SD card adapter

Some items will be slightly different to those shown:

  • Mounting hardware - the vertical "standoffs" are a different type, the kit should have 4x nylon standoffs, 4x nylon nuts, 4x short nylon bolts.
  • Battery pack - the plug is of a different type.

Please check over the items in your kit, and if you think you are missing something then let us know.

Overview

There are three main steps to getting your SimpleBot up and running:

  • Assembling the "SimpleBot Shield", which is supplied in kit form.
  • Assembling the full SimpleBot chasis.
  • Setting up the software and connecting to the SimpleBot.

SimpleBot Shield Assembly

Optional Surface Mount Assembly for SimpleBot Shield (skip this unless you volunteered for expert soldering practice).

SimpleBot Shield Assembly

Chassis Assembly

SimpleBot Chassis Assembly

Software Setup

SimpleBot Initial Software Configuration