SwagBadge2021 D.I.Y DagBadge

From Open Hardware Miniconf
Jump to: navigation, search

DagBadge - the DIY SwagBadge2021

SwagBadge2021 is the official electronic conference badge for the LCA2021 conference, but we don't want to limit participation to people who have the official board. So we've created DagBadge, the DIY electronic conference badge that you can build yourself from readily available parts.

Parts Required

You can adapt this design to suit the parts you have available. To follow our build guide, you will need:

  • 1 x Lolin32 Lite (ESP32 development board)
  • 2 x 0.96" 128x64 I2C OLED display modules
  • 2 x tactile buttons
  • 1 x breadboard
  • Set of jumper wires